BDS SUSPENSION BDS1783FS 6 INCH LIFT KIT W/ 4-LINK RAM 3500 13-18 4WD DIESEL 5 INCH BLOCK 8 BOLT INDEXING RING FOX 2.0 PERFORMANCE SHOCKS

Built to outperform, BDS Suspension engineered a 6-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 diesel powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 6 inch
• Rear Lift Height: 4 inch

1. The carrier bearing drop is necessary for models equipped with the two-piece rear drive shaft.
2. Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement

• Heavy duty 4-link improve strength, handling and caster control
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Rear Lift Option Block Kit

• 5 Inch Block: Level to tail high appearance
• Made of cast iron for high strength.
• Designed to provide correct pinion angles.

Tire Size: 37 x 13.5 Wheel Diameter: 17 x 9 Back Spacing: 5.625

FOX 2.0 Performance Series

• 2-inch Impact extruded aluminum body
• Internal floating piston (Internal Floating Piston) monotube design
• CNC machined 6061-T6 aluminum mounting ends
• Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application-specific valving to maximize performance
• Long-lasting clear anodized finish

8 Bolt Indexing Ring

• Ram has an optional Aisin heavy-duty 6 speed transmission available in the 3500 trucks that utilize a different transfer case mounting bolt pattern (8-bolt).
• The 8-bolt kit also
• Includes an internal shaft seal extension and new shaft seal.

Kit Components:

• Includes one BDS012403, 2013-2018 Ram 3500 4-Link Box Kit (2of2), UPC Code 658848612345
• Includes one BDS012516, Dodge 5 inch Rear Block Kit w/4 inch, UPC Code 658848612598
• Includes one BDS012604, 2013-2018 Ram 3500 6 inch 4-Link Box Kit (1of2), UPC Code 658848612703
• Includes one BDS032602, 2013-2024 Ram 3500 / 2014-2024 Ram 2500 6 inch Coils - Diesel, UPC Code 658848616428
• Includes one BDS122813, 13 3500/14 2500 Ram T-Case Index- 8 Bolt, UPC Code 658848619849
• Includes two FOX98224752, Fox 2.0 Shock 28.25 x 17.15 x 2- S50/EB1
• Includes two FOX98224761, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

Transform your 2013-2018 RAM 3500 diesel truck into a powerhouse with the BDS Suspension BDS1783FS 6 Inch Lift Kit featuring a 4-Link conversion. Engineered for optimal performance, this kit elevates your truck both in height and capability, allowing for the installation of larger tires up to 37 inches, enhancing your ride's stance and aggressive look.

The BDS1783FS lift kit includes diesel-specific Pro-Ride coil springs, which are designed to offer a smooth, controlled ride, regardless of terrain. The innovative 4-Link control arms ensure enhanced stability and handling, correcting suspension geometry to minimize caster change throughout wheel travel. Steering precision is maintained with a forged drop pitman arm and a heavy-duty track bar bracket, ensuring your axle remains centered during dynamic movements.

In the rear, a robust, high-strength fabricated lift block paired with longer u-bolts complements a matching set of NX2 or FOX 2.0 Performance shocks, delivering superior off-road capabilities without compromising comfort. The lift height is meticulously engineered: a 6-inch lift in the front and a 4-inch lift in the rear provides a balanced and level appearance.

This kit integrates easily with your existing components and is adjustable for the two-piece rear driveshaft, with enhanced pinion angles to ensure optimal driveline function. Each component, from the HD transmission crossmember to the sway bar correction brackets, is crafted with the utmost precision, reflecting BDS Suspension's commitment to quality and performance.

Upgrade your RAM 3500's capabilities with the BDS1783FS lift kit, where advanced engineering meets rugged performance, creating a reliable solution for both on-road and off-road adventures. Experience the difference in handling, strength, and style that this lift kit delivers, all backed by BDS’s renowned quality assurance.