BDS SUSPENSION BDS1783FPE 6 INCH LIFT KIT W/ 4-LINK RAM 3500 13-18 4WD DIESEL 5 INCH BLOCK 8 BOLT INDEXING RING FOX 2.5 PERFORMANCE ELITE SHOCKS

Built to outperform, BDS Suspension engineered a 6-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 diesel powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 6 inch
• Rear Lift Height: 4 inch

1. The carrier bearing drop is necessary for models equipped with the two-piece rear drive shaft.
2. Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement

• Heavy duty 4-link improve strength, handling and caster control
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Rear Lift Option Block Kit

• 5 Inch Block: Level to tail high appearance
• Made of cast iron for high strength.
• Designed to provide correct pinion angles.

Tire Size: 37 x 13.5 Wheel Diameter: 17 x 9 Back Spacing: 5.625

FOX 2.5 Performance Elite Series

• Increased off-road capabilities
• Easily adjust your shock for terrain, load and speed
• 2.5-inch Impact extruded aluminum body
• Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
• External reservoir design separates shock oil from the high-pressure nitrogen
• Dual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard
• Fully serviceable for a lifetime of use
• 1-year Manufacturer's Warranty

8 Bolt Indexing Ring

• Ram has an optional Aisin heavy-duty 6 speed transmission available in the 3500 trucks that utilize a different transfer case mounting bolt pattern (8-bolt).
• The 8-bolt kit also
• Includes an internal shaft seal extension and new shaft seal.

Kit Components:

• Includes one BDS012403, 2013-2018 Ram 3500 4-Link Box Kit (2of2), UPC Code 658848612345
• Includes one BDS012516, Dodge 5 inch Rear Block Kit w/4 inch, UPC Code 658848612598
• Includes one BDS012604, 2013-2018 Ram 3500 6 inch 4-Link Box Kit (1of2), UPC Code 658848612703
• Includes one BDS032602, 2013-2024 Ram 3500 / 2014-2024 Ram 2500 6 inch Coils - Diesel, UPC Code 658848616428
• Includes one BDS122813, 13 3500/14 2500 Ram T-Case Index- 8 Bolt, UPC Code 658848619849
• Includes one FOX88326064, Kit: 2014-2024 Ram 2500, Front, 2.5 Truck Fox Performance Elite Series, R/R, 6 inch Lift, Dual Speed Compression Adjust
• Includes one FOX88326102, Kit: 2014-2024 Ram 3500, Rear, 2.5 Truck Fox Performance Elite Series, P/B, 4-6 inchРЎСљ Lift, Dual Speed Compression Adjust

Elevate your driving experience with the BDS SUSPENSION BDS1783FPE 6 Inch Lift Kit, meticulously crafted for 2013-2018 RAM 3500 diesel trucks. This comprehensive suspension system is designed to bolster your truck’s performance, stance, and capability, allowing you to navigate any terrain with confidence. With clearance for up to 37-inch tires, this lift kit is perfect for those looking to enhance both functionality and aesthetics.

At the forefront of the kit are diesel-specific Pro-Ride coil springs that provide a smooth ride while maintaining the necessary lift. The innovative 4-Link control arms optimize suspension geometry, greatly improving handling and stability. The comprehensive package also includes a forged drop pitman arm and a heavy-duty track bar drop bracket, ensuring optimal steering angles and axle alignment. Precision-tuned NX2 or FOX 2.0 nitrogen-charged shocks enhance off-road performance, ensuring that your ride remains smooth over bumps and rugged terrain.

The rear lift is achieved via a high-strength fabricated lift block, complemented by longer u-bolts and quality shocks for superior rear support. Designed with heavy-duty components, the 4-Link conversion significantly enhances strength and control, vital for heavier loads and off-road adventures.

Additional features include an HD transmission crossmember, a t-case indexing ring, and a front sway bar correction—integral elements that ensure your truck's driveline angles remain ideal, preserving factory driveline functionality. The kit's 8-Bolt Indexing Ring accommodates specific transmission requirements, enhancing compatibility and performance.

With a 1-year manufacturer's warranty and the capabilities that come with upgraded shocks and components, the BDS1783FPE lift kit is an unparalleled choice for RAM 3500 enthusiasts looking to take their vehicle to new heights. Experience the ultimate combination of style and performance with this robust suspension upgrade.