BDS SUSPENSION BDS1780FPE 5.5 INCH LIFT KIT W/ 4-LINK RAM 3500 13-18 4WD GAS 4 INCH BLOCK FOX 2.5 PERFORMANCE ELITE

Built to outperform, BDS Suspension engineered a 5.5-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability.

This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 5.5 inch
• Rear Lift Height: 4 inch

1. 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.
2. The carrier bearing drop is necessary for models equipped with two-piece rear drive shaft.
3. Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
4. DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6 inch kits

• Heavy duty 4-link improve strength, handling and caster control
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Rear Lift Option Block Kit

• 4 Inch Block: Tail low to level stance
• Made of cast iron for high strength.
• Designed to provide correct pinion angles.

Tire Size: 35 x 12.5 Tire Size 2: 37 x 13.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 17 x 9 Back Spacing: 4.5/5.625

Kit Components:

• Includes one BDS012403, 2013-2018 Ram 3500 4-Link Box Kit (2of2), UPC Code 658848612345
• Includes one BDS012405, 03-up Dodge 3/4ton 4 Inch Rear, UPC Code 658848612352
• Includes one BDS012604, 2013-2018 Ram 3500 6 inch 4-Link Box Kit (1of2), UPC Code 658848612703
• Includes one BDS032401, 2013-2018 Ram 3500 / 2014-2018 2500 Ram - Front Coils 4 inch Diesel - 5.5 inch Gas, UPC Code 658848616367
• Includes one BDS122616, Ram T-Case Index - Gas - 6 Bolt, UPC Code 658848619702
• Includes one FOX88326064, Kit: 2014-2024 Ram 2500, Front, 2.5 Truck Fox Performance Elite Series, R/R, 6 inch Lift, Dual Speed Compression Adjust
• Includes one FOX88326102, Kit: 2014-2024 Ram 3500, Rear, 2.5 Truck Fox Performance Elite Series, P/B, 4-6 inchРЎСљ Lift, Dual Speed Compression Adjust

Elevate your 2013-2018 RAM 3500 gas truck to new heights with the BDS Suspension BDS1780FPE 5.5-inch lift kit featuring a cutting-edge 4-Link conversion. Engineered with precision, this kit enhances your vehicle's stance, performance, and overall capability, enabling clearance for impressive 37-inch tires.

The front system incorporates gas-specific Pro-Ride coil springs designed for a smooth ride on various terrains. Equipped with robust 4-Link control arms, conversion mounts, a forged drop pitman arm, and a track bar bracket, it ensures optimal steering correction. This thoughtful design also includes bump stops, brake line brackets, and precision-tuned NX2 or FOX 2.0 nitrogen-charged shocks for a seamless driving experience.

In the rear, the heavy-duty fabricated lift block combined with longer u-bolts supports the robust setup, while matching NX2 Nitro or FOX 2.0 Performance shocks allow for enhanced responsiveness and durability. The 4-Link conversion stands out by converting the factory stamped steel radius arms, improving suspension geometry and delivering superior handling characteristics. Crafted from high-strength 1/4-inch steel, the brackets facilitate the mounting of heavy-duty upper and lower control arms to maintain axle positioning through travel.

Designed to enhance your truck's overall handling, the BDS1780FPE lift kit features a forged drop pitman arm that minimizes steering angles and a heavy-duty track bar drop bracket that centers the axle during suspension travel. With specific rear lift methods and comprehensive shock options included, this kit stands out as an all-in-one solution for truck enthusiasts seeking improved strength and performance off-road and on. Transform your RAM 3500’s capabilities while keeping it comfortable and stylish on and off the beaten path.