BDS SUSPENSION BDS1762FPE 4 INCH LIFT KIT W/ RADIUS ARM RAM 2500 14-18 4WD DIESEL FOX 2.5 PERFORMANCE ELITE

Take your 2014-2018 RAM 2500 diesel powered truck to the next level with this 4-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes progressive rate Pro-Ride coil springs, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Coil Springs
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 2.5 inch

• Heavy duty tubular radius arms improve strength, handling and caster control
• High strength progressive rate coil springs for a great ride on any terrain
• Track bar relocation brackets to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

FOX 2.5 Performance Elite Series

• Increased off-road capabilities
• Easily adjust your shock for terrain, load and speed
• 2.5-inch Impact extruded aluminum body
• Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
• External reservoir design separates shock oil from the high-pressure nitrogen
• Dual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard
• Fully serviceable for a lifetime of use
• 1-year Manufacturer's Warranty

Tire Size: 35 x 12.5 Wheel Diameter: 20 x 9 Back Spacing: 5.625

Kit Components:

• Includes one BDS012258, 2014-2018 Ram 2500 2.5 inch Rear Coil Spring Replacement Box Kit, UPC Code 658848612161
• Includes one BDS012432, 2014-2018 Ram 2500 4wd 4 inch Radius Arm Front Box Kit, UPC Code 711745611702
• Includes one BDS032401, 2013-2018 Ram 3500 / 2014-2018 2500 Ram - Front Coils 4 inch Diesel - 5.5 inch Gas, UPC Code 658848616367
• Includes one BDS122321, 2013-2024 Ram 2500 /2013-2024 Ram 3500 Radius Arm Box Kit, UPC Code 658848619429
• Includes one FOX88326064, Kit: 2014-2024 Ram 2500, Front, 2.5 Truck Fox Performance Elite Series, R/R, 6 inch Lift, Dual Speed Compression Adjust
• Includes one FOX88326066, Kit: 2014-2023 Ram 2500, Rear, 2.5 Truck Fox Performance Elite Series, P/B, 10.6 inch, 2-3.5 inch Lift, Dual Speed Compression Adjust

Elevate the performance and style of your 2014-2018 RAM 2500 diesel truck with the BDS Suspension BDS1762FPE 4-Inch Lift Kit featuring a robust radius arm setup. This meticulously engineered suspension lift kit is crafted to enhance your vehicle's capabilities, delivering an impressive 4-inch lift that accommodates larger 35-inch tires for an aggressive stance on or off the road.

At the forefront of this lift kit are diesel-specific Pro-Ride coil springs designed for optimal lift and a smooth ride across various terrains. The heavy-duty tubular radius arms replace the factory stamped steel, ensuring superior strength and enhanced handling. These arms allow for precise caster adjustment and feature an OE-style rubber bushing for a quiet and service-free experience.

To maintain driving stability, the kit includes a forged drop pitman arm and a heavy-duty track bar relocation bracket, keeping your axle positioned correctly during suspension travel. The sway bar correction components ensure that your vehicle maintains excellent handling performance, even when faced with challenging off-road trails.

In the rear, progressive rate Pro-Ride coil springs and accompanying adjustments guarantee a seamless ride. Pair these upgrades with either BDS NX2 Nitro shocks or FOX 2.0 Performance shocks to experience improved comfort and control on rugged landscapes.

With features like a durable 2.5-inch aluminum shock body, a massive heat-treated steel shaft, and external reservoirs for heat dissipation, the FOX 2.5 Performance Elite shocks offer customizable performance for any load or terrain condition. The kit is designed for easy installation, utilizing factory driveline angles and factory driveshaft compatibility.

Meticulously crafted for the enthusiast who demands excellence, the BDS1762FPE lift kit transforms your RAM 2500 into a powerhouse that stands out in both style and performance. Adventure awaits with this outstanding suspension upgrade.