BDS SUSPENSION BDS1723H 4 INCH LIFT KIT W/ 4-LINK RAM 3500 W/ REAR AIR RIDE 19-24 4WD GAS NX2 NITRO SHOCKS

Raise your RAM 3500 with factory rear air bags truck to next heights with this 6-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength steel lift block, heavy duty air bag spacer, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 3 inch

1. Fits OE equipped air ride systems only
2. Exhaust modification is required to clear the front driveshaft. The vehicle can be driven w/o a front driveshaft to an exhaust shop.
3. Vehicles equipped with a Manual T-case, requires BDS122422 Manual transfer case shifter extension.
4. Vehicles equipped with a 2-piece rear drive shaft (carrier bearing), require BDS122406 Carrier bearing drop.

• Heavy duty tubular radius arms improve strength, handling and caster control
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Shock Option NX2 Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

Tire Size: 37 x 12.5 Wheel Diameter: 20 x 9 Back Spacing: 5.625

Kit Components:

• Includes one BDS012319, 2019-2024 Ram 3500 Auto Level Air Suspension 3 inch Rear w/o overload, UPC Code 711745611474
• Includes one BDS012433, 2019-2024 Ram 2500 / 2019-2024 Ram 3500 4-Link Box Kit 1of2, UPC Code 658848612437
• Includes one BDS012434, 2019-2024 Ram 2500 / 2019-2024 Ram 3500 4-Link Box Kit - 2 of 2, UPC Code 658848612444
• Includes one BDS032302, 2013-2024 Ram 3500 / 2014-2024 2500 Ram Coils 3 inch Diesel - 4 inch Gas, UPC Code 658848616343
• Includes one BDS122626, 2019-2024 Ram 2500 / 2019-2024 Ram 3500 T-Case Index - 6 Bolt - Gas, UPC Code 658848619788
• Includes two BDS85700, Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2, UPC Code 711745609495
• Includes two BDS85758, Shock- 27.90 x 16.55 x 2-3/8 - EB1/EB1, UPC Code 711745609679

Elevate your RAM 3500 with the BDS SUSPENSION BDS1723H 4-Inch Lift Kit, engineered specifically for models equipped with factory rear air ride from 2019 to 2024. This comprehensive lift kit offers an impressive boost in both height and performance, allowing you to conquer off-road challenges while accommodating tires up to 37 inches.

At the forefront of this kit are heavy-duty Pro-Ride coil springs, designed to provide a smooth ride and superior control across varied terrains. Paired with robust tubular radius arms, the kit enhances stability and handling, offering caster adjustability for optimal alignment. The steering correction features a forged drop pitman arm and track bar bracket, maintaining precise steering geometry while ensuring the front axle stays centered during suspension movement.

The rear setup includes a high-strength steel lift block and heavy-duty air bag spacer, accompanied by longer u-bolts. The NX2 Nitro or FOX 2.0 Performance shocks further improve ride comfort and off-road capability. An indexing ring and new transmission crossmember are included to ensure compatibility with the factory front driveshaft at this lifted height.

With meticulous attention to detail, this lift kit facilitates modifications, including sway bar relocation and brake line brackets, all tailored to enhance your truck's capability. The BDS1923H Lift Kit is not just a lift; it’s a ticket to a more commanding presence on and off the road, giving your RAM 3500 the performance edge it deserves.

Engineered for simplicity and effectiveness, the BDS1723H 4-Inch Lift Kit is the ideal choice for truck owners looking to augment their vehicle's stance and functionality while dealing with rugged terrains or simply wanting an imposing look on city streets. Conquer new heights with unparalleled confidence and style.