BDS SUSPENSION BDS1717H 4 INCH LIFT KIT W/ 4-LINK RAM 2500 W/ REAR AIR RIDE 19-24 4WD GAS NX2 NITRO SHOCKS

Built to outperform, BDS Suspension engineered a 4-inch lift kit with 4-Link conversion for your 2019-2024 RAM 2500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes heavy duty rear air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Spacer
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 3.5 inch

1. Not for use with factory rear coil spring suspensions
2. Will not fit RAM 2500 Powerwagon models
3. Models equipped with a 2 piece rear driveshaft may require carrier bearing drop kit # 122406
4. Will not fit Cab and Chassis models

• Heavy duty 4-link arms improve strength, handling and caster control
• High strength progressive rate coil springs for a great ride on any terrain
• Track bar relocation brackets to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Shock Option NX2 Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

Tire Size: 37 x 12.5 Wheel Diameter: 20 x 9 Back Spacing: 5.625

Kit Components:

• Includes one BDS012358, 2019-2024 Ram 2500 3.5 inch Rear Air Ride Box Kit, UPC Code 658848612307
• Includes one BDS012433, 2019-2024 Ram 2500 / 2019-2024 Ram 3500 4-Link Box Kit 1of2, UPC Code 658848612437
• Includes one BDS012434, 2019-2024 Ram 2500 / 2019-2024 Ram 3500 4-Link Box Kit - 2 of 2, UPC Code 658848612444
• Includes one BDS032302, 2013-2024 Ram 3500 / 2014-2024 2500 Ram Coils 3 inch Diesel - 4 inch Gas, UPC Code 658848616343
• Includes one BDS122626, 2019-2024 Ram 2500 / 2019-2024 Ram 3500 T-Case Index - 6 Bolt - Gas, UPC Code 658848619788
• Includes two BDS85700, Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2, UPC Code 711745609495
• Includes two BDS85764, Shock- 24.80 x 14.80 x 2 - Special/EB1, UPC Code 711745609730

Elevate your driving experience with the BDS Suspension BDS1717H 4 Inch Lift Kit, meticulously designed for 2019-2024 RAM 2500 gas-powered trucks equipped with rear air ride. This innovative lift kit enhances your vehicle's stance, performance, and capability, allowing for the installation of larger tires up to 35 inches, ensuring you conquer both on and off-road adventures with confidence.

The kit includes specially engineered gas-specific Pro-Ride coil springs and a robust 4-Link control arm setup that significantly improves suspension geometry for enhanced handling. Complemented by a forged drop pitman arm and track bar bracket, this system ensures optimized steering correction, offering precision control whether you’re navigating tight turns or tackling rugged terrain.

For a seamless installation, the kit comes equipped with an indexing ring and a new transmission crossmember, which maintains alignment for the factory front driveshaft, crucial after lifting your truck. The rear suspension features durable airbag spacers, track bar relocation brackets, and bump stop extensions, all paired with high-quality NX2 Nitro or FOX 2.0 shocks for superior ride comfort.

Offering a bold lift of 4 inches in the front and 3.5 inches in the rear, the BDS1717H not only enhances aesthetics but also boosts your truck’s off-road performance significantly. Key components like heavy-duty control arms, sway bar correction, and robust transmission components work together to ensure lasting durability.

With the BDS Suspension BDS1717H, your RAM 2500 transforms into a powerful machine equipped to handle any obstacle while providing a smooth driving experience across diverse terrains. Experience the perfect blend of style, strength, and functionality with this comprehensive lift kit.