BDS SUSPENSION BDS1716H 4 INCH LIFT KIT W/ RADIUS ARM RAM 2500 W/ REAR AIR RIDE 19-24 4WD GAS NX2 NITRO SHOCKS

Take your RAM 2500 gas powered truck to the next level with this 4-inch radius arm lift kit from BDS Suspension. Works with factory rear air ride equipped trucks only. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied.

In the rear this kit utilizes heavy duty rear air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Spacer
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 3.5 inch

1. Fits OE equiped air ride Systems only
2. Exhaust modification is required to clear the front driveshaft. The vehicle can be driven w/o a front driveshaft to an exhaust shop

• Heavy duty tubular radius arms improve strength, handling and caster control
• High strength progressive rate coil springs for a great ride on any terrain
• Track bar relocation brackets to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Shock Option NX2 Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

Tire Size: 37 x 12.5 Wheel Diameter: 20 x 9 Back Spacing: 5.625

Kit Components:

• Includes one BDS012358, 2019-2024 Ram 2500 3.5 inch Rear Air Ride Box Kit, UPC Code 658848612307
• Includes one BDS012431, 2019-2024 Ram 2500 / 2019-2024 Ram 3500 4 inch Front Box Kit, UPC Code 658848612420
• Includes one BDS032302, 2013-2024 Ram 3500 / 2014-2024 2500 Ram Coils 3 inch Diesel - 4 inch Gas, UPC Code 658848616343
• Includes one BDS122321, 2013-2024 Ram 2500 /2013-2024 Ram 3500 Radius Arm Box Kit, UPC Code 658848619429
• Includes one BDS122626, 2019-2024 Ram 2500 / 2019-2024 Ram 3500 T-Case Index - 6 Bolt - Gas, UPC Code 658848619788
• Includes two BDS85700, Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2, UPC Code 711745609495
• Includes two BDS85764, Shock- 24.80 x 14.80 x 2 - Special/EB1, UPC Code 711745609730

Elevate your RAM 2500 gas-powered truck with the BDS SUSPENSION BDS1716H 4 Inch Lift Kit featuring radius arms designed specifically for models equipped with factory rear air ride from 2019 to 2024. Crafted to enhance both performance and aesthetic appeal, this comprehensive kit provides the perfect balance of height and capability while accommodating tires up to 35 inches.

At the forefront, the kit incorporates gas-specific Pro-Ride coil springs along with durable replacement radius arms, ensuring improved handling and ride quality. A forged drop pitman arm and track bar bracket facilitate precise steering correction, while additional components like sway bar relocation and brake line brackets round out the full transformation.

The rear suspension benefits significantly from heavy-duty air bag spacers, a track bar relocation bracket to maintain optimal axle positioning, and bump stop extensions. Completing the setup are NX2 Nitro or FOX 2.0 performance shocks, engineered to deliver enhanced comfort and control on diverse terrains.

The innovative HD tubular radius arms replace the factory components, providing superior strength and caster adjustment flexibility. Coupled with progressive rate coil springs, you can expect a smooth and reliable ride, preventing premature coil bind and ensuring longevity.

Included in the kit are important features for complete installation, such as a heavy-duty transmission crossmember and a t-case indexing ring, which are essential for maintaining proper driveline angles. The 10-stage velocity-sensitive valving of the nitrogen-charged shocks enhances off-road performance, ensuring a robust ride that stands the test of challenging environments.

Transform your RAM 2500 into a formidable vehicle ready to take on any adventure with this all-inclusive lift kit that promises reliability, strength, and superior performance.