BDS SUSPENSION
BDS SUSPENSION BDS1650H 6 INCH LIFT KIT W/ 4-LINK RAM 3500 W/ REAR AIR RIDE 13-18 4WD DIESEL 8 BOLT INDEXING RING NX2 NITRO SHOCKS
- SKU:
- BDS1650H
- MPN:
- BDS1650H
- Shipping:
- Calculated at Checkout
Description
Built to outperform, BDS Suspension engineered a 6-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 diesel powered truck that will surely impress. Works only on trucks equipped with factory rear air ride. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.
Up front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.
In the rear this kit utilizes a high-strength fabricated lift block, heavy duty air bag spacers, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.
4-Link Conversion
Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.
Pro-Ride Coil Springs
A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.
Steering Correction
To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
- Front Lift Method: Coil Spacers
- Rear Lift Method: Coil Spacers
- Shocks Included: Yes
- Front Lift Height: 6 inch
- Rear Lift Height: 6 inch
- The carrier bearing drop is necessary for models equipped with two piece rear drive shaft.
- Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
- DRW models fit inner wheel clearance to the upper u-bolt plate on 6 inch kits
- Fits OE equipped air ride systems only
- Heavy duty 4-link improve strength, handling and caster control
- Front high strength progressive rate coil springs for a great ride on any terrain
- Front track bar relocation bracket to re-position axle
- Forged drop pitman arm to correct steering angles
- Front sway bar correction to maintain handling performance
- HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
- BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance
Shock Option NX2 Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
Tire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 17 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5.625/5.625
8 Bolt Indexing Ring
- Ram has an optional Aisin heavy-duty 6 speed transmission available in the 3500 trucks that utilize a different transfer case mounting bolt pattern (8-bolt).
- The 8-bolt kit also
- Includes an internal shaft seal extension and new shaft seal.
Kit Components:
- Includes one BDS012403, 2013-2018 Ram 3500 4-Link Box Kit (2of2), UPC Code 658848612345
- Includes one BDS012604, 2013-2018 Ram 3500 6 inch 4-Link Box Kit (1of2), UPC Code 658848612703
- Includes one BDS012618, 2013-2018 Ram 3500 Auto Level Air Suspension 6 inch Rear, UPC Code 658848612789
- Includes one BDS032602, 2013-2024 Ram 3500 / 2014-2024 Ram 2500 6 inch Coils - Diesel, UPC Code 658848616428
- Includes one BDS122813, 13 3500/14 2500 Ram T-Case Index- 8 Bolt, UPC Code 658848619849
- Includes two BDS85752, Shock- 27.40 x 16.20 x 2-3/8 - S50/EB2, UPC Code 711745609624
- Includes two BDS85769, Shock- 30.95 x 18.15 x 2-3/8 - EB1/EB1, UPC Code 711745609761
The heart of this lift kit lies in its high-quality components. The front end features diesel-specific Pro-Ride coil springs that ensure a smooth and predictable ride, accompanied by a robust 4-Link control arm conversion. This innovative design not only bolsters suspension geometry for improved handling but also reinforces stability while reducing caster changes throughout wheel travel. A forged drop pitman arm optimizes steering angles, while a dedicated track bar relocation bracket ensures proper axle positioning.
In the rear, the kit includes high-strength fabricated lift blocks, heavier duty air bag spacers, and longer U-bolts paired with precision-tuned NX2 Nitro or FOX 2.0 Performance shocks. These shocks, featuring nitrogen-charged twin-tube designs with advanced velocity-sensitive valving, provide incredible ride quality both on and off the road.
Achieving compatibility with up to 37-inch tires, this lift kit is an essential modification for any RAM 3500 owner looking to enhance their truck's capabilities without compromising comfort. Installation is straightforward with full necessary components provided, including heavy-duty transmission crossmembers and an 8-bolt indexing ring designed for the Aisin heavy-duty transmission.
The BDS1650H Lift Kit is not merely an upgrade; it’s a transformation that empowers your RAM 3500 to conquer any challenge while delivering the driving experience you’ve always wanted. Take the leap and redefine your road presence with this exceptional lift kit.