BDS SUSPENSION BDS1620FS 5.5 INCH LIFT KIT W/ 4-LINK RAM 3500 13-18 4WD GAS LEAF SPRINGS FOX 2.0 PERFORMANCE SHOCKS

Built to outperform, BDS Suspension engineered a 5.5-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability.

This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 5.5 inch
• Rear Lift Height: 4 inch

1. 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.
2. The carrier bearing drop is necessary for models equipped with two-piece rear drive shaft.
3. Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
4. DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6 inch kits

• Heavy duty 4-link improve strength, handling and caster control
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Leaf Springs

• Level stance front to rear.
• Eliminates any need for a lift block.
• Reduces axle wrap and creates a more controlled and stable feel.
• Multi-leaf progressive design for a smooth ride.
• Maintains factory payload weight ratings.

Tire Size: 35 x 12.5 Tire Size 2: 37 x 13.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 17 x 9 Back Spacing: 4.5/5.625

Kit Components:

• Includes two BDS002609, Ram Rear Leaf Spring, UPC Code 658848611300
• Includes one BDS012403, 2013-2018 Ram 3500 4-Link Box Kit (2of2), UPC Code 658848612345
• Includes one BDS012604, 2013-2018 Ram 3500 6 inch 4-Link Box Kit (1of2), UPC Code 658848612703
• Includes one BDS032401, 2013-2018 Ram 3500 / 2014-2018 2500 Ram - Front Coils 4 inch Diesel - 5.5 inch Gas, UPC Code 658848616367
• Includes one BDS122616, Ram T-Case Index - Gas - 6 Bolt, UPC Code 658848619702
• Includes two FOX98224752, Fox 2.0 Shock 28.25 x 17.15 x 2- S50/EB1
• Includes two FOX98224761, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1
• Includes four UBT4067, 9/16 x 4 x 12-1/2 Round U-bolt, UPC Code 711745613003

The BDS Suspension BDS1620FS 5.5 Inch Lift Kit is expertly engineered to elevate the performance and style of your 2013-2018 RAM 3500 gas-powered truck. With its robust design, this kit delivers a remarkable 5.5 inches of lift, enabling clearance for impressive tire sizes up to 37 inches, while significantly enhancing your truck’s stance and off-road capability.

The kit features gas-specific Pro-Ride coil springs at the front, crafted to offer reliable lift height and a smooth ride across a variety of terrains. Complementing this is a 4-Link conversion that optimizes suspension geometry, ensuring better handling and stability. The robust 1/4-inch steel brackets facilitate the attachment of heavy-duty upper and lower control arms, ensuring precise axle positioning and reduced caster change throughout travel.

Included in this comprehensive kit are precision-tuned NX2 or FOX 2.0 nitrogen-charged shocks that enhance ride quality and performance, whether on the highway or rough trails. Steering is improved with a forged drop pitman arm and a heavy-duty track bar drop bracket, effectively correcting steering angles and maintaining axle positioning during movement.

The rear section of the kit utilizes high-strength fabricated lift blocks, accompanied by longer u-bolts and matching performance shocks to provide a level stance without compromising ride quality or payload capacity. The multi-leaf progressive design of the leaf springs further controls axle wrap, delivering a more stable and enjoyable driving experience.

Designed for heavy-duty use, the BDS1620FS lift kit not only boosts the off-road capabilities of your RAM 3500 but also integrates seamlessly with its factory components, ensuring a ride that's both powerful and refined. Upgrade your truck with this next-level suspension system for outstanding performance in every situation.