BDS SUSPENSION BDS1608FPE 5.5 INCH LIFT KIT W/ 4-LINK RAM 3500 13-18 4WD GAS 5 INCH BLOCK FOX 2.5 PERFORMANCE ELITE

Built to outperform, BDS Suspension engineered a 5.5-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability.

This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 5.5 inch
• Rear Lift Height: 4 inch

1. 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.
2. The carrier bearing drop is necessary for models equipped with two-piece rear drive shaft.
3. Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
4. DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6 inch kits

• Heavy duty 4-link improve strength, handling and caster control
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Rear Lift Option Block Kit

• 5 Inch Block: Level to tail high appearance
• Made of cast iron for high strength.
• Designed to provide correct pinion angles.

Tire Size: 35 x 12.5 Tire Size 2: 37 x 13.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 17 x 9 Back Spacing: 4.5/5.625

Kit Components:

• Includes one BDS012403, 2013-2018 Ram 3500 4-Link Box Kit (2of2), UPC Code 658848612345
• Includes one BDS012516, Dodge 5 inch Rear Block Kit w/4 inch, UPC Code 658848612598
• Includes one BDS012604, 2013-2018 Ram 3500 6 inch 4-Link Box Kit (1of2), UPC Code 658848612703
• Includes one BDS032401, 2013-2018 Ram 3500 / 2014-2018 2500 Ram - Front Coils 4 inch Diesel - 5.5 inch Gas, UPC Code 658848616367
• Includes one BDS122616, Ram T-Case Index - Gas - 6 Bolt, UPC Code 658848619702
• Includes one FOX88326064, Kit: 2014-2024 Ram 2500, Front, 2.5 Truck Fox Performance Elite Series, R/R, 6 inch Lift, Dual Speed Compression Adjust
• Includes one FOX88326102, Kit: 2014-2024 Ram 3500, Rear, 2.5 Truck Fox Performance Elite Series, P/B, 4-6 inchРЎСљ Lift, Dual Speed Compression Adjust

Elevate your driving experience with the BDS Suspension BDS1608FPE 5.5-inch Lift Kit, expertly crafted for the 2013-2018 RAM 3500 4WD gas trucks. This comprehensive lift kit not only enhances your truck's stance but also optimizes its performance and off-road capability, allowing for the installation of tires up to 37 inches in size.

The front section of the kit features gas-specific Pro-Ride coil springs, designed to provide exceptional lift and comfort across diverse terrains. The innovative 4-Link conversion utilizes robust control arms and precisely engineered mounts, ensuring improved handling and stability while keeping axle positioning in check. A forged drop pitman arm and track bar bracket further enhance steering correction, minimizing the angle for smooth maneuvering.

In the rear, the kit incorporates a high-strength fabricated lift block, complemented by longer U-bolts and performance-oriented NX2 Nitro or FOX 2.0 shocks. This configuration not only delivers a lift of 4 inches in the rear but also ensures a balanced ride and optimal pinion angles.

The advanced 4-Link configuration stands out by replacing factory radius arms with heavy-duty components, adding strength and vastly improving suspension geometry. The BDS Suspension kit is designed as a bolt-on upgrade, utilizing 1/4-inch steel brackets to secure the upper and lower control arms.

This lift kit is engineered to ensure a sturdy foundation for both on and off-road adventures. With the inclusion of a heavy-duty transmission crossmember, t-case indexing ring, and corrections for sway bar functionality, every aspect of your RAM's performance is taken into serious consideration. Experience an elevation in both your truck’s stance and capabilities with the BDS1608FPE lift kit—your ultimate solution for a commanding presence and superior handling.