null
BDS SUSPENSION

BDS SUSPENSION BDS1597FS 4" RADIUS ARM LIFT KIT W/ FOX 2.0 SERIES SHOCK 2011-2016 FORD F-250/350 6.7L POWERSTROKE 4WD

(No reviews yet) Write a Review
SKU:
BDS1597FS
MPN:
BDS1597FS
Shipping:
Calculated at Checkout
$3,002.75
724-785-4022

Description

Improve the ride on your 2011-2016 Ford F250 and F350 Super Duty diesel truck with this 4-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, u-bolt flip kit for max ground clearance, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

 

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits

  • Easy, 100% Bolt-on installation
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Recommended Tires & Wheels

(Trimming may be required)

  • 35 x 12.5 with 18 x 9 and 4.5 in. Backspace
  • 35 x 12.5 with 20 x 9 and 4.5 in. Backspace

Rear Lift Option

4 Inch Block Kit

  • Included in the base system.
  • Made of cast iron for high strength.
  • Designed to provide correct pinion angles.

Leaf Springs

  • Eliminates any need for a lift block.
  • Reduces axle wrap and creates a more controlled and stable feel.
  • Multi-leaf progressive design for a smooth ride.
  • Maintains factory payload weight ratings.

Shock Option

NX2 Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • 1-3/8-inch high-flow piston
  • Self-lubricating seals
  • Silver powder coat finish

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

IMPORTANT NOTES: 

  1. Removal of factory block required. Net rear lift height will vary depending on the height of the factory block but will result in a level stance.
  2. If equipped with a 2-piece driveshaft, a driveshaft alignment kit may be required.
  3. Although extremely rare, front and/or rear driveline vibration may occur.
  4. If equipped with a rear sway bar, #123009 is required.
  5. U-bolts will not work on dually.

Est. Install Time :

8 hrs

Difficulty Level :

Moderate

Specialty Tools Needed :

Drill / Bit Set, Pitman Arm Puller
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Leaf Spring
  • Shocks Included : Yes
  • Front Lift Height : 4"
  • Rear Lift Height : 4"

 

YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2011 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2011 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2012 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2012 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2013 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2013 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2014 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2014 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2015 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2015 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2016 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2016 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
 

Elevate your 2011-2016 Ford F-250 or F-350 Super Duty diesel truck with the BDS Suspension BDS1597FS 4" Radius Arm Lift Kit featuring FOX 2.0 Series shocks. This expertly engineered lift kit is designed to enhance your vehicle's stance, performance, and off-road capability, allowing for the installation of up to 35" tires for a commanding presence on and off the road.

The kit boasts diesel-specific Pro-Ride coil springs that offer an optimal lift height while ensuring a smooth and predictable ride across diverse terrains. Featuring heavy-duty tubular radius arms, this lift kit replaces factory components and allows for caster adjustment, resulting in improved steering and control. The forged drop pitman arm and track bar bracket maintain precise steering angles, enhancing your driving experience.

In the rear, a robust fabricated lift block is complemented by a U-bolt flip kit to maximize ground clearance and improves stability. The inclusion of NX2 Nitro or the high-performance FOX 2.0 shocks provides exceptional damping for improved handling. Each shock has been precision-tuned for vehicle-specific valving, guaranteeing a comfortable braking experience while tackling demanding landscapes.

Installation is straightforward with 100% bolt-on components, ensuring that you can effortlessly improve your truck’s dynamics. With a moderate difficulty level and an estimated installation time of 8 hours, this lift kit comes with everything you need for a seamless upgrade.

Transform your Super Duty truck with an elevated stance that commands attention while providing enhanced stability and performance on all terrains. Get ready to tackle challenging trails and heavy loads with the BDS SUSPENSION BDS1597FS 4" Radius Arm Lift Kit, the ideal choice for serious off-road enthusiasts.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products