BDS SUSPENSION BDS1565F 4" COILOVER 4-LINK LIFT KIT 2020-2022 FORD F-350 6.7L POWERSTROKE 4WD DRW

Take your 2020-2022 Ford F-350 6.7L Powerstroke 4WD DRW to the next level with the BDS Suspension BDS1565F 4" Coilover 4-Link Lift Kit. These systems are based around the tried and true 4-link conversion offering improved stability, strength and caster control during wheel travel compared to the factory radius arm setup. The 4-link brackets are built from 1/4" steel and key off the factory frame bracket and transmission crossmember for extra strength and utilize heavy wall 2" OD DOM control arms to correctly position the front axle. In place of the factory coil these system upgrade to a pair of specially tuned FOX 2.5 factory series remote reservoir coilovers to take your Super Duty to the next level in performance. These coilovers are preset right out of the box for optimal performance with the weight of the 6.7L Powerstroke diesel engine and installed using the supplied frame and axle mounting brackets. Paired to these FOX coilovers are a set of auxiliary FOX 2.0 IFP performance gas shocks to further enhance dampening for a smooth ride on any terrain. A forged drop pitman arm and heavy-duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets.

In the rear, lift blocks are provided to level out the stance. The blocks are built from high strength, fully boxed steel with an integrated bump stop wing. Both the blocks and supplied U-bolts are finished in a durable black e-coat finish. Finishing off the rear of this kit are a pair of matching FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. These new 4" 4-link coilover conversion systems allow for clearance of up to 37" tires. Take your Super Duty to the next level with BDS Suspension.

FEATURES:

• 4" Coilover Lift Kit

• Rear Lift Blocks

• Bump Stop Extensions

• Black E-Coated U-Bolts

• Sway Bar Drop Brackets

• Forged Drop Pitman Arm

• High-Strength 4-Link Setup

• Brake Line Relocation Brackets

• Heavy-Duty Track Bar Relocation Bracket

• All Necessary Mounting Hardware Included

• Covered By BDS's "No Fine Print" Warranty

• FOX 2.0 IFP Performance Series Shocks (Rear)

• FOX 2.0 IFP Performance Series Shocks (Auxiliary)

• FOX 2.5 Factory Series Remote Reservoir Coilovers (Front)

SUGGESTED WHEEL & TIRE COMBINATIONS

37 x 12.50 w/17 x 9 and 4.5" - 5" back spacing

37 x 12.50 w/18 x 9 and 4.5" - 5" back spacing

37 x 12.50 w/20 x 9 and 4.5" - 5" back spacing

*trimming may be required

IN THE BOX

BDS1565F

FOX 2.5 Coilover

KIT NOTES:

Removal of the factory leaf spring block is required. The net rear lift will vary depending on the height of the factory block but will result in a level stance.

If equipped with a 2-piece rear driveshaft, BDS Carrier Bearing Drop Kit may be required (part # 123402).

A torque wrench capable of 405 ft-lbs is required.

37 x 12.50" tires may require minor trimming.

KIT CONTENTS:

(1) BDS013317 - 2020-2022 Ford F-250/F-350 3In Rear Box Kit

(1) BDS013423 - 2017-2022 Ford F-250 / F-350 4in 4-Link Box Kit 2of2

(1) BDS013601 - 2017-2022 Super Duty 4-Link Box Kit 1of2

(1) BDS123613 - 2017-2022 Super Duty Coil-over Mount Kit

(1) BDS85431 - 2017-2022 F250/F350 Single Stabilizer - BDS Only

(1) FOX88402149 - Kit: BDS 11-20 Ford F250/F350 Front Coilover, 2.5 Series, R/R 4" Lift

(2) FOX98224700 - Fox 2.0 Shock 25.65 x 16.05 x 2- S50/EB1

(2) FOX98224718 - Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

VEHICLE FITMENT