BDS SUSPENSION BDS1572FPE 7" COILOVER 4-LINK PERF ELITE LIFT KIT 2020-2022 FORD F-250/350 6.7L POWERSTROKE 4WD

Get next level performance from your 2020-2022 Ford F-250/350 6.7L Powerstroke 4WD with a BDS Suspension BDS1572FPE 7" Coilover 4-Link Performance Elite Lift Kit. These kits are designed to improve performance and capability offroad while retaining great on-road handling. This kit builds on the BDS radius arm design to convert the front springs over to FOX 2.5 Performance Elite (PE) coilovers. These aluminum bodied coilovers offer improved damper performance, better heat dispersion and easy tuning via the DSC (dual speed compression) adjusters located on the reservoir allowing you to dial in the high-speed and low-speed compression settings. These coilovers come pre-tuned and fully assembled to easy installation with the provided bolt-on coilover mounting brackets.

The foundation for this kit is the tried-and-true BDS radius arm lift kit that utilizes high strength tubular gusseted radius arms to correct front axle positioning, add strength and increase ground clearance. The kit also includes steering correction with a forged drop pitman arm along with an HD track bar bracket. Sway bar and brake line relocation brackets are utilized along with bump stop extensions. Fox 2.0 Performance Series shocks and lift blocks level out the stance in the rear. BDS designs this kit as a complete solution to transform your Super Duty to tame the any terrain. As with all BDS kits, these include Factory Protection Plus offering you a 5yr/60k-mile drivetrain warranty and no fine print warranty on the kit itself. Take your Super Duty to the next level with BDS and FOX.

FEATURES:

• 7" Coilover Lift Kit

• Rear Lift Bocks

• Black E-Coated U-Bolts

• Bump Stop Extensions

• Forged Drop Pitman Arm

• High-Strength 4-Link Setup

• Heavy-Duty Track Bar Bracket

• Sway Bar Relocation Brackets

• Brake Line Relocation Brackets

• All Necessary Mounting Hardware Included

• Covered By The BDS "No Fine Print" Warranty

• FOX 2.0 IFP Performance Series Shocks (Rear)

• FOX 2.0 IFP Performance Series Shocks (Auxiliary)

• FOX 2.5 Performance Elite (PE) Coilovers (Front)

SUGGESTED WHEEL & TIRE COMBINATIONS

38x13.50 w/20x9 and 4.5" - 5" back spacing

38x13.50 w/17x10 and 5" back spacing

38x13.50 w/20x10 and 5" back spacing

*trimming may be required

IN THE BOX

BDS1572FPE

FOX 2.0 Series

KIT NOTES:

Fits Diesel models only.

Ford recommends replacement of the pitman arm nut after each time it has been removed.

Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.

If equipped with a rear sway bar, BDS end link kit (part # 123808) is required.

If equipped with a 2-piece rear driveshaft, BDS Carrier Bearing Drop Kit may be required (part # 123402).

Larger tires on stock wheel are not recommended due to brake line clearance required. Use recommended specs listed in wheel and tire fitment section.

The indexing ring is only compatible with 10 speed transmission trucks. 

Indexing Ring has NOT been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required.

Installation requires a torque wrench capable of 405 ft-lbs.

KIT CONTENTS:

(2) BDS003639 - 2017-2022 Super Duty 6" Rear Leaf Spring (1) BDS013601 - 2017-2022 Super Duty 4-Link Box Kit 1of2 (1) BDS013604 - 2017-2022 Ford F-250 / F-350 6" 4-Link Box Kit 2of2 (1) BDS013617 - 2017-2022 Super Duty Rear Leaf Spring Box Kit (1) BDS123605 - 2017-2022 SD T-Case Indexing Kit- DSL (1) BDS123613 - 2017-2022 Super Duty Coil-over Mount Kit (1) BDS85431 - 2017-2023 F250/F350 Single Stabilizer (1) FOX88406428 - Kit: BDS 05-On Ford SD Front Coilover, 2.5 Truck PES, R/R 6" Lift, DSC (2) FOX98224718 - Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1 (2) FOX98224750 - Fox 2.0 Shock 28.25 x 17.15 x 2- S50/EB1

VEHICLE FITMENT