BDS SUSPENSION BDS1563F 4" COILOVER RADIUS ARM LIFT KIT 2020-2022 FORD F-350 6.7L POWERSTROKE 4WD DRW

Built to take full advantage of the factory suspension design, the BDS Suspension BDS1563F 4" Coilover Radius Arm Lift Kit offers enough room for 37" tires on your 2020-2022 Ford F-350 6.7L Powerstroke 4WD DRW. At the heart of this system is a pair of heavy-duty radius arms built to withstand whatever abuse you can throw at them. Built from 1-3/4" OD -10GA DOM tubing with support gussets, these replacement arms are far superior to the factory stamped steel units. They use a high clearance design for extra ground clearance and are formed inward to allow for additional clearance of oversized tires. They incorporate factory style 3-1/4" rubber bushings to minimize road vibrations and allow for a long, maintenance-free bushing life. The arms bolt into the factory mounting points and reposition the front axle to correct caster angle.

The additional 4" lift comes from a pair of specially tuned FOX 2.5 Factory Series Remote Reservoir Coilovers. These coilovers are preset right out of the box for optimal performance with the weight of the 6.7L Powerstroke diesel engine. They install using the supplied frame and axle mounting brackets and pair with FOX 2.0 performance gas shocks offer a smooth ride and improved control over rough terrain. To improve steering angles a forged drop pitman arm is supplied with an integrated drag link flip. Used in combination with the 1/4" thick heavy duty track bar drop bracket will position the front axle and keep the track bar angle in phase with the steering for improved handling. Also included for the front suspension are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets and a NX2 series steering stabilizer with mounting bracket. In the rear, fabricated blocks with an integrated bump stop wing is used in place of the factory block to level the stance. Longer black e-coated U-bolts and FOX 2.0 shocks round out this 4" radius arm lift system.

FEATURES:
4" Coilover Lift Kit
Rear Lift Blocks
Bump Stop Extensions
Black E-Coated U-Bolts
Forged Drop Pitman Arm
Sway Bar Relocation Brackets
Brake Line Relocation Brackets
High-Strength Tubular Radius Arms
Heavy-Duty Track Bar Relocation Bracket
All Necessary Mounting Hardware Included
Covered By The BDS "No Fine Print" Warranty
FOX 2.0 IFP Performance Series Shocks (Rear)
FOX 2.0 IFP Performance Series Shocks (Auxiliary)
Choice Of FOX 2.5 Factory Series Remote Reservoir Coilovers

SUGGESTED WHEEL & TIRE COMBINATIONS
37x12.50 w/17x9 and 4.5"-5" back spacing
37x12.50 w/18x9 and 4.5"-5" back spacing
37x12.50 w/20x9 and 4.5"-5" back spacing
*trimming may be required
IN THE BOX

BDS1563F
FOX 2.5 Coilover

KIT NOTES:
Removal of the factory leaf spring block is required. The net rear lift will vary depending on the height of the factory block but will result in a level stance.
If equipped with a 2-piece rear driveshaft, BDS Carrier Bearing Drop Kit may be required (part # 123402).
A torque wrench capable of 405 ft-lbs is required.
37 x 12.50" tires may require minor trimming.

KIT CONTENTS:
(1) BDS013317 - 2020-2022 Ford F-250/F-350 3In Rear Box Kit
(1) BDS013414 - 2017-2022 Super Duty 4" Front Box Kit
(1) BDS123251 - 2005-2022 Ford F250/F350 Radius Arm Kit, Pair
(1) BDS123613 - 2017-2022 Super Duty Coil-over Mount Kit
(1) BDS85431 - 2017-2022 F250/F350 Single Stabilizer - BDS Only
(1) FOX88402149 - Kit: BDS 11-20 Ford F250/F350 Front Coilover, 2.5 Series, R/R 4" Lift
(2) FOX98224700 - Fox 2.0 Shock 25.65 x 16.05 x 2- S50/EB1
(2) FOX98224718 - Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

VEHICLE FITMENT
YEAR
MAKE
FOR ENGINE SERIES
2020
Ford
6.7L Powerstroke
2021
Ford
6.7L Powerstroke
2022
Ford
6.7L Powerstroke