BDS SUSPENSION BDS1573FDSC 6" COILOVER RADIUS ARM LIFT KIT W/ FOX DSC 2020-2022 FORD F-350 6.7L POWERSTROKE 4WD DRW

Built to take full advantage of the factory suspension design, the B BDS Suspension BDS1573FDSC 6" Coilover Radius Arm Lift Kit W/Fox DSC offers enough room for 38" tires in your 2020-2022 Ford F-350 6.7L Powerstroke 4WD DRW. At the heart of this system is a pair of heavy-duty radius arms built to withstand whatever abuse you can throw at them. Built from 1-3/4" OD -10GA DOM tubing with support gussets, these replacement arms are far superior to the factory stamped steel units. They use a high clearance design for extra ground clearance and are formed inward to allow for additional clearance of oversized tires. They incorporate factory style 3-1/4" rubber bushings to minimize road vibrations and allow for a long, maintenance-free bushing life. The arms bolt into the factory mounting points and reposition the front axle to correct caster angle.

The additional 6" lift comes from a pair of specially tuned FOX 2.5 Factory Series Remote Reservoir Coilovers with DSC (Dual Speed Compression). These coilovers are preset right out of the box for optimal performance with the weight of the 6.7L Powerstroke diesel engine. They install using the supplied frame and axle mounting brackets and pair with FOX 2.0 performance gas shocks offer a smooth ride and improved control over rough terrain. To improve steering angles a forged drop pitman arm is supplied with an integrated drag link flip. Used in combination with the 1/4" thick heavy duty track bar drop bracket will position the front axle and keep the track bar angle in phase with the steering for improved handling. Also included for the front suspension are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets and a NX2 series steering stabilizer with mounting bracket. In the rear, fabricated block with integrated bump stop wing is used in place of the factory block to level the stance. Longer black e-coated U-bolts and FOX 2.0 shocks round out this 4" radius arm lift system.

FEATURES:

• 6" Coilover Lift Kit

• Rear Lift Blocks

• Bump Stop Extensions

• Black E-Coated U-Bolts

• Forged Drop Pitman Arm

• Sway Bar Relocation Brackets

• Brake Line Relocation Brackets

• High-Strength Tubular Radius Arms

• Heavy-Duty Track Bar Relocation Bracket

• All Necessary Mounting Hardware Included

• Covered By The BDS "No Fine Print" Warranty

• FOX 2.0 IFP Performance Series Shocks (Rear)

• FOX 2.0 IFP Performance Series Shocks (Auxiliary)

• FOX 2.5 Factory Series Remote Reservoir Coilovers with DSC (Dual Speed Compression)

SUGGESTED WHEEL & TIRE COMBINATIONS

38x13.50 w/20x9 and 4.5-5" back spacing

38x13.50 w/20x10 and 5" back spacing

*trimming may be required

IN THE BOX

BDS1573FDSC

FOX DSC

KIT NOTES:

If equipped with a 2-piece rear driveshaft, BDS Carrier Bearing Drop Kit may be required (part # 123402).

38 x 13.50" tires may require minor trimming.

The indexing ring is not designed for manual shift transfer case models. Modification of the shift cable mount will be required.

KIT CONTENTS:

(1) BDS013526 - 17-20 F350 Dually 5" Block Kit

(1) BDS013603 - 2020-2022 F250/F350 6in RA Front Box Suspension System

(1) BDS123251 - 2005-2022 Ford F250/F350 Radius Arm Kit, Pair

(1) BDS123605 - 2017-2022 SD T-Case Indexing Kit- DSL

(1) BDS123613 - 2017-2022 Super Duty Coil-over Mount Kit

(1) BDS85431 - 2017-2022 F250/F350 Single Stabilizer - BDS Only

(1) FOX88406127 - X - Kit: BDS 05-20 Ford F250/F350 Front Coilover, 2.5 Series, R/R 6" Lift, DSC

(2) FOX98224718 - Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

(2) FOX98224750 - Fox 2.0 Shock 28.25 x 17.15 x 2- S50/EB1

VEHICLE FITMENT