BDS SUSPENSION BDS1560H 4 INCH LIFT KIT W/ RADIUS ARM FORD F250/F350 SUPER DUTY 17-19 4WD GAS LEAF SPRING NX2 NITRO SHOCKS

Improve the ride on your 2017-2019 Ford F250 and F350 Super Duty gas powered truck with this 4-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes gasoline-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, gasoline-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 5 inch

1. Front exhaust modification may be required to clear front drive shaft
2. If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)
3. 37 x 12.50 Tires may require minor trimming.
4. Some models may be factory equipped with a 2-leaf main rear leaf spring pack and others a 3-leaf main. Be sure to order the correct option when customizing your kit.

• Easy, 100 percent Bolt-on installation
• Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
• Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
• Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
• Fabricated steel blocks provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Leaf Springs

• Reduces axle wrap and creates a more controlled and stable feel
• Multi-leaf progressive design for smooth ride
• Maintains factory payload weight ratings
• Anti-friction pads provide a smooth and quiet ride

Tire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5/5

Shock Option NX2 Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

Kit Components:

• Includes two BDS003639, 2017-2024 Super Duty 6 inch Rear Leaf Spring, UPC Code 658848611409
• Includes one BDS013414, 2017-2024 Super Duty 4 inch Front Box Kit, UPC Code 658848613458
• Includes one BDS013438, 2017-2024 Ford F250/F350 4 inch Rear Leaf Spring Box Kit, UPC Code 658848613540
• Includes one BDS033412, 2005-2024 Ford F250/F350 Gas 4 inch Coil Spring Kit, UPC Code 658848616534
• Includes one BDS123251, 2005-2022 Ford F250/F350 Radius Arm Kit, Pair, UPC Code 711745604087
• Includes one BDS85431, 2017-2024 F250/F350 Single Stabilizer, UPC Code 711745609242
• Includes two BDS85700, Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2, UPC Code 711745609495
• Includes two BDS85718, Shock - 33.00 x 19.25 x 2-3/8 - EB1/EB1, UPC Code 711745609563

Elevate the performance and style of your 2017-2019 Ford F250 or F350 Super Duty gas truck with the BDS SUSPENSION BDS1560H 4-Inch Lift Kit with Radius Arms. Tailored for the true enthusiast, this kit not only enhances your vehicle's stance but also significantly improves ride quality and off-road capability, allowing for tire clearance of up to 37 inches.

The front of the kit features gasoline-specific Pro-Ride coil springs and heavy-duty tubular radius arms, expertly designed to replace the factory parts while optimizing caster adjustment and ground clearance. This meticulous engineering promises a smooth, quiet operation, bolstered by OE-style rubber bushings at the frame mount.

For optimal steering control, the kit includes a forged drop pitman arm and a robust track bar bracket, both crafted to maintain proper steering geometry and ensure recentering of the front axle throughout suspension travel. The rear of the truck is enhanced with high-strength fabricated lift blocks and longer u-bolts, complemented by brakes line brackets and a matching set of NX2 Nitro shocks for superior handling and comfort across varied terrains.

Installation is a breeze with a 100% bolt-on design, ensuring a hassle-free setup. The multi-leaf progressive design of the leaf springs minimizes axle wrap, delivering a stable and controlled driving experience while maintaining factory payload ratings. The impressive nitrogen-charged NX2 shocks offer enhanced control and performance, making every off-road adventure a joy.

Incorporate the BDS15560H Lift Kit into your Ford’s arsenal for a combination of functionality, durability, and aesthetic appeal, setting new standards for what your truck can achieve on and off the road. Take the leap towards superior performance and striking looks today!