BDS SUSPENSION
BDS SUSPENSION BDS148H 8 INCH LIFT KIT CHEVY/GMC 3/4 TON SUBURBAN 88-91 4WD NX2 NITRO SHOCKS
- SKU:
- BDS148H
- MPN:
- BDS148H
- Shipping:
- Calculated at Checkout
Description
Go big with your 1988-1991 Chevy and GMC 3/4 ton Suburban to raise the bar to new heights with this 8-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 38 inch Tires.
Up front the lift kit includes Glide-Ride leaf springs, 4 inch steering arm and 3 inch steering block for steering correction, brake line brackets, sway bar drop brackets and precision tuned NX2 nitrogen charged shocks. In the rear this kit utilizes a set of Glide-Ride leaf springs for the ultimate performance on and off road, new u-bolts and a matching set of NX2 Nitro shocks.
Glide-Ride Leaf Springs
Built to outperform, BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.
- Front Lift Method: Leaf Spring
- Rear Lift Method: Leaf Spring
- Shocks Included: Yes
- Front Lift Height: 8 inch
- Rear Lift Height: 8 inch
- Both driveshafts may need to be lengthened.
- Aftermarket extended brake lines are required for installation.
- Exhaust modification may be required to clear the front driveshaft.
- Emergency brake cable extension kit may be required.
- #001608 come with OE style rubber bushings installed.
- The 3/4 ton commonly came with a factory 56 inch eye to eye rear leaf spring. However, some were produced with a 52 inch rear spring. This kit will not work with 52 inch rear springs. If ordering rear leaf springs, be sure to measure your factory rear spring before ordering.
- If equipped with a factory front sway bar, order the front sway bar shackle link kit listed in the accessories section.
- Some vehicle came with factory front dual shocks. If you wish to replace the factory duals, you must order the additional two auxiliary shocks in the options.
- Easy, 100 percent Bolt-on installation
- Glideride leaf springs to provide full lift height and increased capacity
- New steering arm maintains proper steering angles for improved handling
- Cast steel blocks and add-a-leaf provide level stance from front to rear
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
Kit Components:
- Includes two BDS001608, GM 3/4 ton 6 Inch Rear Spring-52 eye-to-eye, UPC Code 658848611232
- Includes two BDS001801, 73-91 GM 8in Front Spring, UPC Code 658848611256
- Includes one BDS011003, 88-91 GM Blazer/Suburban Front Box Kit, UPC Code 658848611645
- Includes one BDS011208, GM 3/4 ton 2 Inch Rear Box Kit, UPC Code 658848611683
- Includes one BDS081401, 69-91 GM 4 Steering Arm, UPC Code 658848618064
- Includes one BDS082501, 3in Steering Block w/Studs& Nuts- Dana44, UPC Code 658848618187
- Includes one BDS121000, 73-87 GM Transfer Case Lowering Kit, UPC Code 658848618804
- Includes one BDS121451, Front Sway Bar Drop Kit, UPC Code 658848619061
- Includes two BDS85639, Shock- 29.70 x 17.60 x 2-3/8 - EB1/EB1, UPC Code 711745609440
- Includes two BDS85650, Shock- 26.20 x 15.80 x 2-3/8 - EB1/EB1, UPC Code 711745609457
At the core of this kit are the innovative Glide-Ride leaf springs that feature a multi-leaf progressive spring rate design. This exclusive triple-stage leaf system not only enhances load-bearing capacity but also ensures a smooth ride regardless of road conditions. Complementing the front lift are precisely engineered components, including a 4-inch steering arm and 3-inch steering block that maintain optimum steering angles, along with brake line and sway bar drop brackets for flawless installation.
The rear performance is equally robust, utilizing Glide-Ride leaf springs paired with NX2 Nitro shocks, delivering exceptional control and stability whether you're on rugged trails or cruising down the highway. The easy, bolt-on installation makes it user-friendly, while heavy-duty cast steel blocks and add-a-leaf components achieve a perfectly level stance.
Enhance the driving experience with standard NX2 Nitro shocks, featuring vehicle-specific valving for tailored handling, with an option to upgrade to FOX 2.0 Performance Series shocks for those seeking maximum off-road capabilities.
This kit includes all essential components, meticulously crafted for compatibility and reliability. Adventure awaits with the BDS 148H Lift Kit—maximize your Suburban’s potential and embrace every journey with confidence.