BDS SUSPENSION BDS1415H 3 INCH LIFT KIT JEEP WRANGLER JK 12-18 2-DOOR SWAY BAR DISCONNECTS NX2 NITRO SHOCKS

Upgrade the ride and style of your 2012-2018 Jeep Wrangler JK 2 Door with this 3-inch coil spring lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.

Up front the lift kit includes 3 inch Pro-Ride coil springs capable of full coil bind and 2 inch bump stop extensions to control the compression travel, but increase wheel travel. Also included are brake line brackets, alignment cams to fine tune front caster angles, and sway bar links.

In the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 3 inch lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 Internal Floating Piston performance series gas shocks to offer improved damper performance.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

• Front Lift Method: Coil Spring
• Rear Lift Method: Coil Springs
• Shocks Included: Yes
• Front Lift Height: 3 inch
• Rear Lift Height: 3 inch

1. Removing the OE spring isolators will result in a 1 Inch Lift if desired.
2. 124408 rear track bar or 124308 rear track bar relocation is recommended if using factory wheels
3. This kit is FMVSS No.126 Compliant
4. This kit is right hand drive compatible.

• ProRide coil springs offer improved ride quality and more articulation
• Sway bar quicker disconnects and extended rear link for improved offroad flex
• Rear track bar bracket repositions rear axle under vehicle
• Lower cam locks to correct caster for alignment
• Choice of NX2 gas or FOX 2.0 Internal Floating Piston performance series shocks for improved damping
• Allows clearance for 35 inch Tires

Shock Option NX2 Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

Sway Bar Link Option Disconnects

• Gain 30 percent more axle articulationl by disconnecting your front sway bar
• Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
• Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
• Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability

Kit Components:

• Includes one BDS014310, Jeep Wrangler JK 3in Box Kit, UPC Code 658848614028
• Includes one BDS034209, 2007-2018 Jeep Wrangler (JK) 2 Door /3in 4 Door/2in Rear Coil Springs, UPC Code 658848616701
• Includes one BDS034312, 2007-2018 Jeep Wrangler (JK) 2 Door 3in Front Coils, UPC Code 658848616787
• Includes one BDS124314, 2012-18 Jeep Wrangler JK Exhaust Extension Kit, UPC Code 711745605015
• Includes two BDS85700, Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2, UPC Code 711745609495
• Includes two BDS85951, Shock- 25.95 x 15.40 x 2 - BP18/EB1, UPC Code 711745610040

Enhance your 2012-2018 Jeep Wrangler JK 2 Door with the BDS Suspension BDS1415H 3-inch Lift Kit, meticulously engineered for those seeking superior performance and style. This complete lift kit transforms your vehicle’s stance, providing ample clearance for tires up to 35 inches, allowing for an aggressive, off-road-ready look that commands attention.

At the core of this kit are the premium Pro-Ride coil springs, designed for maximum articulation and durability. Manufactured from high tensile steel, these springs ensure reliable performance across various terrains, delivering a smooth ride while maintaining optimal control. The kit includes 3-inch front and rear coil springs paired with essential components such as bump stop extensions, brake line brackets, and alignment cams for precise caster angle adjustments.

The rear assembly features sway bar drop brackets and a track bar relocation bracket, which corrects axle shift, ensuring the perfect alignment and handling both on and off the road. Choose between the NX2 Nitro Series gas shocks or FOX 2.0 Internal Floating Piston shocks, each offering improved damping and stability, tailored for superior control.

For off-road enthusiasts, the quick disconnect sway bar links enhance axle articulation by 30%, making it easier to tackle challenging trails. With convenient grease fittings and self-align bushings, these links guarantee smooth operation and reliability in diverse conditions.

Crafted for right-hand drive compatibility and compliant with FMVSS No. 126, this lift kit also includes comprehensive installation components, ensuring a seamless upgrade. Elevate your Jeep's capabilities and aesthetics with the BDS1415H Lift Kit, designed to meet the demands of adventure seekers while providing comfort and reliability on every journey.