BDS SUSPENSION BDS1403FPE 3 INCH LIFT KIT JEEP WRANGLER JK 12-18 4-DOOR SWAY BAR DISCONNECT W/FOX 2.5 PERFORMANCE ELITE SHOCKS

Upgrade the ride and style of your 2012-2018 Jeep Wrangler JK 4 Door with this 3-inch coil spring lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.

Up front the lift kit includes 3 inch Pro-Ride coil springs capable of full coil bind and 2 inch bump stop extensions to control the compression travel, but increase wheel travel. Also included are brake line brackets, alignment cams to fine tune front caster angles, and sway bar links.

In the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 3 inch lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 Internal Floating Piston performance series gas shocks to offer improved damper performance.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter.

This results in maximum reliability without premature coil bind.

• Front Lift Method: Coil Spring
• Rear Lift Method: Coil Springs
• Shocks Included: Yes
• Front Lift Height: 3 inch
• Rear Lift Height: 3 inch

1. Exhaust modification may be required.
2. This kit is FMVSS No.126 Compliant
3. This kit is right-hand drive compatible. Follow right-hand drive installation instructions when installing this kit on a right-hand drive vehicle.
4. If using these rear sway bar links, the sway bar drop will not need to be installed. This also requires a wheel with 4.5 inch backspacing or less for Tire clearance.

• ProRide coil springs offer improved ride quality and more articulation
• Sway bar quicker disconnects and extended rear link for improved offroad flex
• Rear track bar bracket repositions rear axle under vehicle
• Lower cam locks to correct caster for alignment
• Choice of NX2 gas or FOX 2.0 Internal Floating Piston performance series shocks for improved damping
• Allows clearance for 35 inch Tires

FOX 2.5 Performance Elite Series

• Increased off-road capabilities
• Easily adjust your shock for terrain, load and speed
• 2.5-inch Impact extruded aluminum body
• Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
• External reservoir design separates shock oil from the high-pressure nitrogen
• Dual Speed Compression Adjust - Dual Speed Compression Adjuster comes standard
• Fully serviceable for a lifetime of use
• 1-year Manufacturer's Warranty

Sway Bar Link Option Disconnects

• Gain 30 percent more axle articulationl by disconnecting your front sway bar
• Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
• Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
• Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability

Kit Components:

• Includes one BDS014310, Jeep Wrangler JK 3in Box Kit, UPC Code 658848614028
• Includes one BDS034311, 2007-2018 Jeep Wrangler (JK) 2 Door /4 Inch 4 Door/3in Front Coil Springs, UPC Code 658848616770
• Includes one BDS034319, 2007-2018 Jeep Wrangler (JK) 2 Door /4 Inch 4 Door/3in Rear Coil Springs, UPC Code 658848616794
• Includes one BDS124314, 2012-18 Jeep Wrangler JK Exhaust Extension Kit, UPC Code 711745605015
• Includes one FOX88326091, Kit: 07-18 Jeep Wrangler JK Front, 2.5 Truck Fox Performance Elite Series, R/R, 2.5-4 inchРЎСљ Lift, Dual Speed Compression Adjust
• Includes one FOX88326092, Kit: 07-18 Jeep Wrangler JK Rear, 2.5 Truck Fox Performance Elite Series, P/B, 2.5-4 inchРЎСљ Lift, Dual Speed Compression Adjust

The BDS Suspension BDS1403FPE 3 Inch Lift Kit is the ultimate upgrade for your 2012-2018 Jeep Wrangler JK 4-Door, enhancing both its off-road performance and striking appearance. This comprehensive lift kit is designed to raise your vehicle by a full three inches, allowing for the installation of larger tires—up to 35 inches—providing the clearance and stance you desire.

Equipped with Pro-Ride coil springs, the lift kit ensures excellent ride quality and enhanced articulation across a variety of terrains. These gas-specific, progressive rate springs are manufactured from high tensile steel, guaranteeing durability and preventing premature coil bind. Additionally, included bump stop extensions and brake line brackets enhance both travel and safety.

The setup is meticulously crafted for the rear as well, featuring Pro-Ride coil springs, sway bar drop brackets, and a track bar relocation bracket to rectify axle shift, ensuring optimal alignment and stability on the trail. The choice of either NX2 nitro series gas shocks or FOX 2.0 Internal Floating Piston shocks delivers superior damping performance tailored to diverse conditions, ensuring a smooth ride whether you’re on the highway or tackling rugged off-road challenges.

Equipped with sway bar quick disconnects, this kit allows for an impressive 30 percent increase in axle articulation, enhancing your Jeep's capability in tricky terrain. The installation is straightforward, with compatibility for right-hand drive vehicles and clear instructions for adjustments based on tire backspacing.

Combining advanced engineering and quality materials, the BDS1403FPE 3 Inch Lift Kit not only boosts your vehicle’s performance but also transforms its aesthetic, making it a must-have modification for any adventurous Jeep owner. Drive confidently with the assurance of a 1-year manufacturer’s warranty on all components.