BDS SUSPENSION BDS124H 4 INCH LIFT KIT CHEVY/GMC 3/4 TON TRUCK/SUBURBAN 77-87 4WD 4 INCH BLOCK W/NX2 NITRO SHOCKS

Take your 1977-1987 Chevy and GMC 3/4 ton truck or SUV to the next level with this 4-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability of the K20 and K25, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.

Up front the lift kit includes Glide-Ride leaf springs, 4 inch steering arm for steering correction, brake line brackets and precision tuned NX2 nitrogen charged shocks. In the rear this kit utilizes a high-strength lift block, longer u-bolts and a matching set of NX2 Nitro shocks.

Glide-Ride Leaf Springs

Built to outperform, BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

• Front Lift Method: Leaf Spring
• Rear Lift Method: Blocks
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 4 inch

1. The 3/4 ton commonly came with a factory 56 inch eye to eye rear leaf spring. However, some were produced with a 52 inch rear spring. If ordering rear leaf springs, be sure to measure your factory rear spring before ordering.
2. If equipped with a factory front sway bar, a sway bar drop kit is available in the accessories section.
3. Some vehicle came with factory front dual shocks. If you wish to replace the factory duals, you must order the additional two auxiliary shocks in the options.
4. #001408 come with OE style rubber bushings installed.
5. Exhaust modification may be required to clear front driveshaft.

• Easy, 100 percent Bolt-on installation
• Glideride leaf springs to provide full lift height and increased capacity
• New steering arm maintains proper steering angles for improved handling
• Cast steel blocks and add-a-leaf provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Rear Lift Option 4 Inch Block Kit

• Included in the base system.
• Made of cast iron for high strength.
• Designed to provide correct pinion angles.

Shock Option NX2 Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

Kit Components:

• Includes two BDS001401, 73-91 GM 4 Inch Front Spring, UPC Code 658848611164
• Includes one BDS011001, 77-87 GM Front Box Kit (3.00 dia. front), UPC Code 658848611621
• Includes one BDS011408, GM 3/4 ton 4 Inch Rear Box Kit, UPC Code 658848611805
• Includes one BDS081401, 69-91 GM 4 Steering Arm, UPC Code 658848618064
• Includes two BDS85620, Shock- 23.10 x 14.25 x 2-3/8 - EB1/EB1, UPC Code 711745609402
• Includes two BDS85639, Shock- 29.70 x 17.60 x 2-3/8 - EB1/EB1, UPC Code 711745609440

Elevate your driving experience with the BDS SUSPENSION BDS124H 4-Inch Lift Kit, specifically designed for 1977-1987 Chevy and GMC 3/4 ton trucks and Suburbans. This comprehensive lift kit enhances not only the aesthetic appeal but also the performance and capability of your K20 or K25, providing ample clearance for tires up to 35 inches.

The front of the kit features BDS’s innovative Glide-Ride leaf springs. Crafted with a multi-leaf progressive spring rate design, these springs ensure a smooth ride, accommodating various loads while maintaining flexibility throughout the suspension cycle. Complementing this design is a 4-inch steering arm, which corrects steering angles for improved handling, along with brake line brackets to ensure optimal performance.

For the rear, a high-strength 4-inch lift block is utilized, accompanied by longer u-bolts and a matched set of NX2 Nitro shocks. These shocks are nitrogen-charged and designed with a twin-tube structure, offering exceptional control with 10-stage velocity-sensitive valving.

The installation process promises ease, being 100 percent bolt-on. The kit is engineered to maintain a balanced stance, thanks to cast steel blocks and the addition of an add-a-leaf, leveling out the truck for a commanding presence on the road.

In addition, options for upgrading to FOX 2.0 Performance Series shocks are available, delivering maximum performance whether on or off-road. With components specifically tailored for your vehicle, the BDS124H 4-Inch Lift Kit not only enhances your truck's look but transforms how it handles, making it an essential upgrade for serious enthusiasts and everyday drivers alike.