BDS SUSPENSION BDS120H 8 INCH LIFT KIT CHEVY/GMC 3/4 TON TRUCK/SUBURBAN 73-76 4WD NX2 SHOCKS

Go big with your 1973-1976 Chevy and GMC 3/4 ton truck or SUV to raise the bar to new heights with this 8-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability of the K20 and K25, this kit includes everything necessary to set your truck up right with clearance for up to 38 inch Tires.

Up front the lift kit includes Glide-Ride leaf springs, 4 inch steering arm and 3 inch steering block for steering correction, brake line brackets, sway bar drop brackets and precision tuned NX2 nitrogen charged shocks. In the rear this kit utilizes a set of Glide-Ride leaf springs for the ultimate performance on and off road, new u-bolts and a matching set of NX2 Nitro shocks.

Glide-Ride Leaf Springs

Built to outperform, BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

• Front Lift Method: Leaf Spring
• Rear Lift Method: Springs
• Shocks Included: Yes
• Front Lift Height: 8 inch
• Rear Lift Height: 6 inch

1. The 3/4 ton commonly came with a factory 56 inch eye to eye rear leaf spring. However, some were produced with a 52 inch rear spring. This kit will not work with 52 inch rear springs. If ordering rear leaf springs, be sure to measure your factory rear spring before ordering.
2. Both driveshafts may need to be lengthened.
3. Aftermarket extended brake lines are required for installation.
4. Exhaust modification may be required to clear the front driveshaft.
5. If your vehicle is equipped with a front anti-sway bar, order the anti-sway bar shackle link kit listed in the accessories.
6. 001608 come with OE style rubber bushings installed.

• Easy, 100 percent Bolt-on installation
• Glideride leaf springs to provide full lift height and increased capacity
• New steering arm maintains proper steering angles for improved handling
• Cast steel blocks and add-a-leaf provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
• Kit Components:
• Includes two BDS001608, GM 3/4 ton 6 Inch Rear Spring-52 eye-to-eye, UPC Code 658848611232
• Includes two BDS001801, 73-91 GM 8in Front Spring, UPC Code 658848611256
• Includes one BDS011002, 69-76 GM Front Box Kit (2.75 dia. front), UPC Code 658848611638
• Includes one BDS011208, GM 3/4 ton 2 Inch Rear Box Kit, UPC Code 658848611683
• Includes one BDS081401, 69-91 GM 4 Steering Arm, UPC Code 658848618064
• Includes one BDS082501, 3in Steering Block w/Studs& Nuts- Dana44, UPC Code 658848618187
• Includes one BDS121000, 73-87 GM Transfer Case Lowering Kit, UPC Code 658848618804
• Includes one BDS121451, Front Sway Bar Drop Kit, UPC Code 658848619061
• Includes two BDS85639, Shock- 29.70 x 17.60 x 2-3/8 - EB1/EB1, UPC Code 711745609440
• Includes two BDS85650, Shock- 26.20 x 15.80 x 2-3/8 - EB1/EB1, UPC Code 711745609457

Elevate your driving experience with the BDS Suspension BDS120H 8 Inch Lift Kit, specifically designed for 1973-1976 Chevy and GMC 3/4 ton trucks and Suburbans. This comprehensive kit transforms your vehicle’s stance, enhancing both performance and capability, while allowing clearance for impressive 38-inch tires.

Constructed with precision, the lift kit includes front and rear Glide-Ride leaf springs. The unique multi-leaf progressive spring rate design ensures a smooth ride under any load, thanks to its exclusive triple-stage configuration. The front suspension features a 4-inch steering arm and a 3-inch steering block for optimal steering correction, as well as necessary brake line and sway bar drop brackets. High-quality NX2 nitrogen charged shocks enhance responsiveness and control both on and off-road.

In the rear, you’ll find the same Glide-Ride technology paired with durable u-bolts and NX2 Nitro shocks. This configuration delivers not only an impressive lift height of 8 inches in the front and 6 inches in the rear but also a well-balanced stance for enhanced handling.

Installation is a breeze with 100% bolt-on compatibility. However, be mindful that some modifications may be required, such as lengthening driveshafts and potentially modifying exhaust systems to accommodate the lift. The kit is tailored for vehicles equipped with factory 56-inch rear leaf springs, and those with different specifications should measure accordingly.

Upgrade your vehicle’s suspension and performance with the BDS120H Lift Kit—designed for those who demand both functionality and aesthetics. Whether conquering rugged terrain or cruising the streets, experience stability and comfort like never before.