BANKS 25964 BOOST TUBE UPGRADE KIT (NATURAL) FOR 10-12 CUMMINS 6.7L 24V

Increase flow area up to 37 percent over the stock boost tubes with Banks' huge 3-1/2 inch boost tubes. Stock Ram tubes are plastic. Banks boost tubes are 3-1/2 inch constant diameter mandrel bent Aluminized Steel with larger radius bends. More air allows for more fuel which means more horsepower.

Banks boost tubes are larger than the factory plastic pipe and designed to work with the stock elbow or new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up faster.

Key Features

• Driver/Cold Side Boost-Tube Only
• Works with stock or aftermarket intercooler with stock inlet and outlet size and location
• Mandrel bent Aluminized Steel comepared to the stock Rams plastic tubes
• Designed to work with the stock elbow or new Banks Monster-Ram Gen 2
• More air allows for more fuel which means more horsepower
• Increase flow area up to 37 percent over the stock boost tubes
• 3-1/2 inch constant diameter with larger radius bends
• Mandrel-bent aluminized steel construction
• Constant diameter tubing for the best flow
• 4- and 5-ply heavy-duty silicone couplers
• Spring-loaded constant tension clamps
• Greater cooling capacity
• Perfect fit and finish
• Lower EGTs

CARB E.O. D-161-122

The BANKS 25964 BOOST TUBE UPGRADE KIT is specifically designed to enhance the performance of your 2010-2012 Cummins 6.7L 24V engine. By replacing the stock boost tubes with Banks' colossal 3-1/2-inch boost tubes, you can increase the flow area by up to 37 percent, allowing for a significant improvement in horsepower.

Crafted from sturdy mandrel-bent Aluminized Steel, these boost tubes feature larger radius bends for optimal airflow. Unlike the factory plastic pipes, Banks boost tubes are built to last and work seamlessly with either the stock elbow or the new Banks Monster-Ram Gen 2, promoting quicker turbocharger spool-up and overall enhanced engine efficiency.

Key features of this upgrade kit include a driver/cold side boost tube compatible with both stock and aftermarket intercoolers, mandrel-bent Aluminized Steel construction for durability, and 3-1/2-inch constant diameter tubing with larger radius bends for superior flow. The kit also comes with heavy-duty silicone couplers, spring-loaded constant-tension clamps, and offers greater cooling capacity, resulting in lower exhaust gas temperatures (EGTs).

Experience the power of increased airflow and fuel delivery with the BANKS 25964 BOOST TUBE UPGRADE KIT, ensuring a perfect fit and finish while unlocking the true potential of your Cummins engine.