Product Description
ATI TTR65CB is a DOT special-permit aluminum refueling tank + low-profile toolbox combo built for legal, on-the-go fueling and secure bed storage. Constructed from .125" diamond-plate aluminum with fully welded internal baffles, it’s pressure/leak-tested and designed to fit full-size pickup beds while sitting low under most tonneau/toolbox lids.
Key Features
- Manufacturer-rated 62-gallon refueling capacity (see dimensions below).
- Combo includes a lockable aluminum toolbox with gas shocks and full aluminum piano hinge.
- Two 2" NPT bungs let you place the fill cap or transfer pump on your preferred side.
- Vented cap (lockable vented cap available); clean, debris-free interior; fully baffled.
- Built under U.S. DOT special permit for legal refueling from the mounted tank when used as directed.
Fitment
Universal pickup bed fit for most full-size trucks. Always verify bed width, rail height, and lid/toolbox clearances before ordering.
Dimensions & Capacity
- Tank capacity: 62 gallons (manufacturer spec for TTR65CB)
- Tank (A × B × C): 19" (H) × 60" (L) × 21" (W)
- Toolbox size: 47" (L) × 21" (W) × 6" (H)
- Across-bottom note: TTR65CB is 54" across the bottom (tapered sides)
- Install allowances: Mounting tabs extend ~1.5" each side; add ~2.5" for cap height
What’s Included
- ATI TTR65CB baffled aluminum refueling tank
- Integrated low-profile aluminum toolbox
- Mounting/hold-down tabs
Pumps/hoses sold separately. Add a 12V transfer pump and a lockable vented cap for a complete setup.
Compliance
Manufactured in the USA and built under DOT Special Permit SP14227, authorizing discharge of certain Class 3 liquids from the mounted tank when used per permit and HMR.
FAQ
- Is this combo DOT-approved for gasoline as well as diesel?
- Yes. Under ATI’s DOT special permit, the combo is authorized for gasoline, diesel, kerosene, methanol, and aviation fuel. Always follow local regulations and ATI’s instructions.
- Does the TTR65CB include the transfer pump?
- No. The tank ships with mounting tabs and a vented cap. Add a compatible 12V transfer pump/hoses as needed.
- Will it fit my truck with a bed cover or crossover toolbox?
- The low-profile toolbox is integrated with the tank and sits ~6" high. Verify your cover/toolbox clearances against the listed tank and toolbox dimensions, and allow for the cap height (+~2.5").
- What are the exact dimensions I should plan around?
- Plan for tank ~60" L × 21" W × 19" H and toolbox 47" L × 21" W × 6" H. Tabs add ~1.5" per side; the cap adds ~2.5" to height.
- Is the interior baffled?
- Yes—fully welded baffles reduce slosh and add strength.
