Product Description
ATI TTR38 is a U.S. DOT special-permit, 38-gallon rectangular aluminum refueling tank built from .125" diamond-plate aluminum. It’s fully baffled, pressure/leak-tested, and ready for legal refueling when installed and used per ATI guidance.
Key Features
- .125" aluminum construction; fully baffled interior for stability.
- Commercial-grade vent/lockable filler cap (lockable cap optional).
- Two 2" NPT reinforced bungs to position the cap or transfer pump on either side.
- 3/8" NPT drain; includes hold-down/mounting tabs; cleaned and pressure/leak-tested.
- Approved for gasoline, diesel, methanol, kerosene, aviation fuel (per permit).
Fitment
Universal pickup bed fit—the compact rectangular footprint works in most full-size beds. Always verify bed rail clearances and accessory placement before ordering.
Dimensions & Capacity
- Capacity: 38 gallons
- Overall length: ~48.5–49"
- Overall width: ~11"
- Overall height: ~19"
- Notes: Mounting tabs may add ~1.5" on each side; fuel cap adds ~2.5" to total height—account for these when measuring.
What’s Included
- ATI TTR38 rectangular aluminum refueling tank
- Welded mounting/hold-down tabs
Pumps/hoses sold separately. Add a 12V transfer pump kit and a vented lockable cap for a complete setup.
Compliance
Manufactured in the USA and built under a U.S. DOT special permit that authorizes refueling from the tank when properly installed and used.
Installation Notes
- Bolt through the welded tabs with appropriate hardware into the truck bed per ATI instructions.
- Use the two 2" NPT bungs to locate the filler cap or pump on your preferred side.
FAQ
- Is the TTR38 approved for gasoline as well as diesel?
- Yes. Under ATI’s DOT special permit, the TTR38 is authorized for gasoline, diesel, kerosene, methanol, and aviation fuel. Always follow local regulations and ATI’s usage guidance.
- Does this tank include a pump?
- No. The tank ships with welded tabs and a standard vented cap. Add a compatible 12V transfer pump/hoses as needed.
- What exact dimensions should I plan around?
- Plan for roughly 48.5–49" (L) x 11" (W) x 19" (H). Allow another ~1.5" per side for tabs and ~2.5" additional height for the cap.
- Is the interior baffled?
- Yes. It’s fully baffled to reduce fuel movement and improve stability.
- Can I place the cap or pump on either side?
- Yes—two 2" NPT reinforced bungs let you configure the filler and pump to your preferred side.
