ATI FUEL TANKS SSR110 SEVERE SERIES – 110 GALLON RECTANGLE SHAPED REFUELING TANK

ATI SSR110 Severe Series is a DOT refueling, 110-gallon rectangular tank built from extra-thick .190" aluminum to handle larger pumps and harsher, off-road conditions. It’s fully baffled, pressure/leak-tested, and includes dual 2" NPT bungs so you can position your pump where you want it.

Key Features

• Heavy-duty .190" aluminum (≈50% thicker than standard), with baffles for strength and slosh control.
• Dual 2" NPT bungs with internal support; vented/prevent filler cap.
• DOT special-permit design for legal refueling of gasoline, diesel, kerosene, methanol & aviation fuel when used per instructions.
• Includes hold-down/mounting tabs; clean interior; pressure & leak tested.

Fitment

Universal pickup bed fit for full-size truck beds. Verify bed and accessory clearances prior to install.

Dimensions & Capacity

• Capacity: 110 gallons
• Overall (L × W × H): 48.5" × 24" × 24"
• Notes: Some listings show ~51" × 25" × 24"; allow for mounting tabs and minor variance by supplier. Tabs can add ~1.5" per side; always measure your bed before drilling.

What’s Included

• ATI SSR110 Severe Series rectangular refueling tank
• Mounting/hold-down tabs

Pumps/hoses sold separately. Add a 12V transfer pump kit and a lockable vented cap for a complete setup.

Compliance

Built under ATI’s Severe Series program for heavy-duty use and DOT-permit refueling when properly installed and used. See ATI’s Severe Series overview for use cases and permit notes.

Installation Notes

• Bolt through welded tabs with appropriate 3/8" hardware to the truck bed per ATI instructions.
• Use either 2" NPT bung for pump placement; keep runs short and supported.

FAQ

Is the SSR110 approved for gasoline as well as diesel?

Yes—ATI refueling tanks are sold for gasoline, diesel, kerosene, methanol, and aviation fuel under the DOT special permit when used as directed.

How thick is the metal on the Severe Series?

Severe Series tanks use heavy-duty .190" diamond-plate aluminum—about 50% thicker than the standard duty tanks.

Does the tank include a pump?

No. The tank includes a vented/prevent cap and mounting tabs. Add a compatible 12V transfer pump, hose and nozzle as needed.

What exact dimensions should I plan around?

Plan for ~48.5" L × 24" W × 24" H. Some retailers quote ~51" × 25" × 24"; account for mounting tabs and clearances before drilling.

Is the interior baffled?

Yes. The SSR110 is fully baffled to reduce fuel movement and increase structural integrity.