Product Description
ATI SSL95CB Severe Series is a DOT special-permit, 95-gallon, L-shaped refueling tank and integrated toolbox combo engineered for hard use. Built from .190"-thick diamond-plate aluminum (about 50% thicker than standard duty), it’s fully baffled, pressure/leak-tested, and designed to handle larger transfer pumps and off-road conditions.
Key Features
- Severe Series heavy-duty build: .190" aluminum, fully baffled, reinforced pump bungs.
- L-shape profile with welded 48" x 22" x 17" toolbox; commercial-grade lockable vent/prevent cap.
- Two 2" NPT bungs with internal support—mount your pump on either side.
- Manufactured in the USA; visual, pressure, and leak-tested.
- DOT special permit allows legal refueling from the tank when properly installed/used.
Fitment
Universal pickup bed fit for most full-size trucks. Designed to sit behind the cab; the lower “L” nests with the included toolbox. Always verify bed and toolbox clearances before ordering.
Dimensions & Capacity
- Capacity: 95 gallons
- Overall (tank) dimensions: ~48.5" (L) x 33" (W) x 26" (H)
- Toolbox dimensions: ~48" (L) x 22" (W) x 17" (H)
- Notes: Mounting tabs may add ~1.5" per side; account for fuel cap height when measuring.
What’s Included
- ATI SSL95CB Severe Series L-shaped refueling tank with integrated toolbox
- Hold-down/mounting tabs and vent/prevent filler cap
Pumps/hoses sold separately. Add a 12V transfer pump kit and a lockable vent/prevent cap as desired.
Compliance
Built under a U.S. DOT special permit authorizing refueling from the tank. Approved for gasoline, diesel, kerosene, methanol, and aviation fuel when used per regulations.
Installation Notes
- Bolt through welded tabs with appropriate hardware into the truck bed per ATI instructions.
- Verify toolbox lid clearance and total height with cap installed.
- Position pump and cap on preferred side using the dual 2" NPT bungs.
FAQ
- How is the Severe Series different from standard ATI tanks?
- Severe Series uses .190 aluminum (about 50% thicker), reinforced pump bung supports, and components intended for heavier pumps and rough service.
- Is the SSL95CB DOT approved for gasoline as well as diesel?
- Yes. Under ATI’s DOT special permit, this combo is authorized for gasoline, diesel, kerosene, methanol, and aviation fuel. Always follow federal, state, and local regulations.
- Does the tank include a transfer pump?
- No. The tank ships with mounting tabs and a vent/prevent cap. Add a compatible 12V transfer pump/hoses separately.
- What exact dimensions should I plan around?
- Plan for ~48.5" (L) x 33" (W) x 26" (H) overall, with a ~48" x 22" x 17" toolbox. Mounting tabs can add ~1.5" per side; account for cap height.
- Is it fully baffled?
- Yes. Internal baffles reduce slosh and add structural strength.
Specifications for Aluminum Tanks Industries SSL95CB
| Specification | Details |
|---|---|
| Manufacturer | Aluminum Tanks Industries (ATI) |
| Part Number | SSL95CB |
| SKU | ATISSL95CB |
| Capacity | 95 Gallons |
| Tank Material | .190" Diamond Plate Aluminum (Severe Series) |
| Toolbox Material | .125" Diamond Plate Aluminum |
| Construction | Fully baffled, pressure tested, leak tested |
| Design | Refueling tank with integrated full-length toolbox |
| Dimensions | Approx. 60" L x 24" W x 25" H |
| Weight | Approx. 180 lbs |
| Bungs | Dual 2" NPT Reinforced Bungs |
| Drain | 3/8" NPT Drain |
| Toolbox Features | Lockable lid, weather-resistant seal, gas shocks |
| Finish | Bright Aluminum (Optional powder coat available) |
| Fuel Compatibility | Gasoline, diesel, kerosene, methanol, aviation fuel |
| Mounting | Welded mounting tabs |
| Shipping Info | Freight shipping required due to size |
| UPC | N/A |
| GTIN | N/A |
| Prop 65 | Yes – May expose to chemicals including Carbon Black (California Warning) |
