RIDETECH
RIDETECH 11710110 PERFORMANCE LOWERING SYSTEM 2014-2018 SILVERADO / SIERRA 1500 2WD W/ OE STAMPED STEEL OR ALUMINUM ARMS
- SKU:
- RID11710110
- MPN:
- 11710110
- Shipping:
- Calculated at Checkout
Description
Lower your 2014-2018 Chevy Silverado or GMC Sierra 1500 2WD/4WD 3-4 inches up front and 4-5.5 inches in the rear W/ Ridetech StreetGrip lowering suspension system. More than a lowering kit, StreetGrip will turn your vehicle into a high-performance muscle truck W/ better stance, handling and ride quality.
This system is 100 percent bolt-on, fully adjustable and made in the USA. On some trucks, Ridetech upper StrongArms may be required to set camber to factory alignment specifications, especially if dropping more than 4 inch.
Fitment includes 2014-2018 Chevrolet Silverado and GMC Sierra 1500 (2019 Legacy and Limited) 2WD and 4WD pickups W/ Stamped Steel or aluminum OE Control Arms.
Some trucks (specifically 2014-2016 model years) may have cast steel control arms which use different spindles and ball joints (Kit 11700110 and 11700115). Trucks equipped W/ magnetic suspension require shock simulators.
- For 2014-2018 Silverado / Sierra 1500 2WD
Included
- Front factory springs and shocks are replaced W/ heavy-duty HQ Series Coil-Overs W/ a 1,000,001-mile warranty.
- Front and rear shock absorbers feature rebound adjustment so that you can fine-tune valving to suit your driving style and vehicle specs.
- Drop Spindles finish off the front installation to achieve the ultimate drop.
- Rear suspension upgrades feature an adjustable shackle, adjustable hanger and flip kit.
- Rear adjustable HQ Series monotube shock absorbers.
- All necessary hardware is included to make the swap a simple bolt-on upgrade.
- Fits standard, extended and crew cab 1500 configurations.
Note: Minimum 17 inch diameter wheels are required.
Features
- Lowered stance
- Adjustable ride height, 3-4 inch front drop and 4-5.5 inch rear drop.
- Improved ride quality and handling.
- Rebound adjustable shocks W/ 1,000,001 mile warranty.
- Bolt-on installation - No welding (Rear bump stop bracket must be removed).
- Corrected driveline angles to prevent driveline vibrations.
- Options
Front Sway Bar will increase the sway bar rate by 52 percent and reduce suspension bind W/ Delrin lined bushings and performance end links.
Upper StrongArms correct ball joint angle and allow for a greater range of camber adjustment, which may be needed when lowering 4 inch or more to attain factory alignment specifications.
Engineered with innovation and precision, this fully adjustable system is 100% bolt-on and proudly made in the USA. Included in the kit are heavy-duty HQ Series Coil-Overs, which not only replace the factory springs and shocks but come with a remarkable 1,000,001-mile warranty. Each shock absorber features rebound adjustment, allowing you to fine-tune the valving to align with your driving style and vehicle specifications.
The installation process is user-friendly, complete with all necessary hardware, making it a simple bolt-on upgrade without the need for welding. Drop spindles enhance front installation, achieving optimal lowering, while adjustable shackles and hangers paired with rear monotube shock absorbers ensure a customized suspension setup.
This system also accommodates a broad range of cab configurations, including standard, extended, and crew cabs. For those aiming to further enhance handling, an optional front sway bar increases the sway bar rate by 52%, reducing suspension bind, and Delrin lined bushings ensure durability. If lowering more than 4 inches, consider the upper StrongArms for better ball joint angles and camber adjustments to maintain factory alignment specifications.
Elevate your driving experience with the RIDETECH Performance Lowering System—a perfect blend of form, function, and durability.