INDUSTRIAL INJECTION PDM-360STD GM PERFORMANCE CAST PISTONS FOR 01-16 DURAMAX

Duramax Standard Size Performance Cast Pistons Set Coated Tops and Skirts Deliped Set ( No Valve Relief ) PDM's Ceramic Piston Skirt Coating, is designed to be used, on any rigid or semi rigid surface experiencing sliding, rotating or oscillating friction.

This coating will carry loads in excess of 350,000 PSI as well as lubricate at temperatures in excess of 1600f. This coating combines the durability of a ceramic resin with the lubricity of the ceramic lubricant.

It is used in applications where high temperatures, high loads and high speeds are experienced. When higher temperatures, than most other types of coatings can provide protection at, are experienced, this coating is fully capable of carrying the load.

Gray in color it acquires a glass like finish in use. Cured film thickness of .001 or less requires no change is piston clearance.

PDM's Thermal Barrier Coating for piston tops is Designed for Performance engines running; Nitrous oxide, Supercharged or Turbocharged. It creates a hard surface specifically designed for engines running High volumes of fuel and/or high compression ratios.

The thermal barrier coating. Reduces part temperature. Keeps heat in combustion chamber longer through the power stroke. Increase torque, H.P. and improved combustion chamber efficiency.

Details:

• Standard Size
• Ceramic Piston Skirt Coating
• Thermal Barrier Coating

Elevate your Duramax performance with the INDUSTRIAL INJECTION PDM-360STD GM Performance Cast Pistons set, expertly engineered for models ranging from 2001 to 2016. This standard-size piston set is tailored for high-performance applications, featuring advanced coatings designed to withstand extreme conditions.

Each piston boasts a ceramic coating on both the tops and skirts, enhancing durability and performance. The ceramic piston skirt coating is specifically formulated for use on rigid or semi-rigid surfaces that endure sliding, rotating, or oscillating friction. With the ability to handle loads exceeding 350,000 PSI and perform efficiently at temperatures over 1600°F, these pistons promise reliability in the harshest environments.

The innovative coating blends the resilience of ceramic resin with the lubricating properties of ceramic lubricant, ensuring longevity and reduced wear under high-load situations. The striking gray finish transforms to a glass-like sheen during use, while the uniquely engineered cured film thickness of .001 or less maintains original piston clearance.

For performance engines running nitrous oxide, superchargers, or turbocharging, PDM's Thermal Barrier Coating is a game changer. This hard surface coating effectively reduces part temperatures and optimizes heat retention within the combustion chamber throughout the power stroke. The result is not only increased torque and horsepower but also enhanced combustion chamber efficiency, making every ride more exhilarating.

This set is ideal for any Duramax enthusiast seeking to boost their vehicle’s power while maintaining and exceeding the durability expected from high-performance engine components. Upgrade your engine’s potential and experience optimal performance with the INDUSTRIAL INJECTION PDM-360STD pistons set, where innovation meets excellence in engineering.