FLEECE PERFORMANCE

FLEECE PERFORMANCE FPE-SF-CUMM-9198 SUREFLO PERFORMANCE SENDING UNIT FOR 1991-1998 DODGE CUMMINS

Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump.  Each of these has some pretty significant drawbacks including the 1/4 tank...

FLEECE PERFORMANCE FPE-PF-CUMM-9198 POWERFLO LIFT PUMP FOR 1991-1998 DODGE RAM CUMMINS

Only from Fleece, a complete fuel supply upgrade kit for your 1991-1998 Dodge Cummins.  Includes a new sending unit and float to get your fuel gauge working again! The PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel...

FLEECE PERFORMANCE FPE-CTDT-SERVICE-KIT TURBO DRAIN SERVICE KIT FOR CUMMINS DRAIN TUBES

Replacement turbo drain O-rings for all Fleece Performance turbo oil drain tube kits. Contains two O-rings for the drain adapter that inserts into the engine block and one square cut O-ring for the turbo drain adapter.  FOR USE WITH: FPE-CTDT-19-KIT,...

FLEECE PERFORMANCE FPE-DMAX-HFFBA-1116 AUXILIARY HEATED FUEL FILTER KIT FOR 2011-2016 LML DURAMAX

Introducing our all-new full featured auxiliary fuel filter kit for the 2011-2016 LML 6.6L Duramax! This kit replaces the factory fuel filter housing with a new filter base, integral high-flow fuel heater, Water-In-Fuel (WIF) sensor, and Donaldson...

FLEECE PERFORMANCE FPE-CTDT-CW-KIT TURBO DRAIN TUBE KIT FOR 2003-2007 5.9L CUMMINS

Eliminate the installation headaches associated with a non-flexible OE drain line with our all new silicone hose drain tube kit. This turbo drain kit is designed for use with all 5.9L Cummins equipped Dodge Ram factory style turbochargers and aftermarket...

FLEECE PERFORMANCE FPE-FL-LML-CP3-HP REPLACEMENT HIGH PRESSURE FUEL LINE FOR LML CP3 CONVERSIONS

Replacement high pressure fuel line for 6.6L LML Duramax's with CP3 conversion kits.Features: Replacement High Pressure Fuel Line for LML CP3 Conversions Engine Manufacturer: Duramax Engine Designation: LML Finish: Raw Sold As: Each Fitment: 2011-2016...

FLEECE PERFORMANCE FPE-HAR-CUMM-INJ-PT INJECTOR CONNECTOR WITH PIGTAIL FOR 2006-PRESENT RAM CUMMINS 5.9/6.7L

Cummins injector harness connector with 6 inch pigtail for 2006-2022 5.9L and 6.7L Cummins engines. Two of these connectors are utilized on the engine and connect the injector harness to the valve cover wiring harness. Includes heat-sealable butt-style...

FLEECE PERFORMANCE FPE-HAR-CUMM-FH-PT FUEL HEATER CONNECTOR AND 6 INCH PIGTAIL FOR RAM CUMMINS 5.9/6.7L

Replacement Fuel Heater and Turbo Wastegate Solenoid Electrical Connector with 6 inch Pigtail for the Cummins engines. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and...

FLEECE PERFORMANCE FPE-HAR-MU-PT-5 MULTIUSE SENSOR 6 INCH PIGTAIL

Almost too many applications to list for this multi-purpose two pin connector with 6 inch pigtail. This connector is used in hundreds of applications on GM and Dodge vehicles. Includes heat-sealable butt-style connectors. Produced in-house, our...

FLEECE PERFORMANCE FPE-HAR-CUMM-VP-CC-PT CUMMINS 5.9L VP CRANKSHAFT AND CAMSHAFT SENSOR 6.0 INCH PIGTAIL

Replacement connector and 6 inch pigtail harness for the 1998.5 to 2002 Cummins Camshaft and Crankshaft Position Sensor. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and...

FLEECE PERFORMANCE FPE-HAR-CUMM-MAP-0307-PT CUMMINS 5.9L MAP SENSOR 6 INCH PIGTAIL

Cummins MAP sensor connector with 6 inch pigtail for 2003-2007 5.9L Cummins engines. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get...

FLEECE PERFORMANCE FPE-HAR-DMAX-FPR FUEL PRESSURE REGULATOR WIRING HARNESS FOR 2006-2010 6.6L DURAMAX

Our Fuel Pressure Regulator (FPR) harness for the 2006-2010 6.6L Duramax is a direct replacement for GM Part Number: 97378671 (MY 2006-2010). Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to...