null
FLEECE PERFORMANCE

FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS

(No reviews yet) Write a Review
SKU:
FLCFPE-CP3X2
MPN:
FPE-CP3X2
Shipping:
Calculated at Checkout
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
  • FLEECE FPE-CP3X2 2003-2016 CUMMINS CP3X2 HARNESS
$103.24

Description

Take full control of your Cummins dual CP3's using your just your ECM. The CP3X2 harness allows you to control your Cummins dual pumps without an expensive dual pump controller. 

We recommend multiplying the stock FCA current table (D0787) on the Cummins ECM's by 1.6-1.7 as a place to start. The FCA current varies from truck to truck based on the solenoid characteristics, age, and idle lift pump pressure.

Higher lift pump pressures at idle will require more amperage at the top of the table (low desired fuel flow) to keep the rail at it's target pressure. If the truck will not start after multiplying the table by 1.7, revert back to the original tune and multiply by a smaller number until the truck starts easily, yet maintains the target rail pressure at idle.

This is one of the more time consuming calibration procedures on heavily modified trucks, so make calculated changes, so that you can dial it in as quickly as possible. Once you have the truck idling at the correct target pressure you may need to modify the middle and lower portions of the table to prevent rail pressure overshoot or undershoot.

Again, methodical changes in the FCA table will yield the best results. Use the EFILive Scan Tool to log your changes and adjust in the Tuning Tool as necessary. Keep in mind, more current is less flow, and less current is more, zero current being full flow from all pumps.

Theoretically you should be able to control 3 pumps with the 5000mA of current that the FCA driver is capable of. This may shorten the life of the driver in the ECM so it's best reserved for competition use.

 

DETAILED FITMENT:

  • 2003-2004 Dodge Ram 2500 SLT
  • 2003-2010 Dodge Ram 3500 SLT
  • 2003-2010 Dodge Ram 3500 Laramie
  • 2003-2003 Dodge Ram 2500 Laramie
  • 2003-2004 Dodge Ram 2500 ST
  • 2003-2010 Dodge Ram 3500 ST
  • 2005-2010 Dodge Ram 2500 Laramie
  • 2006-2007 Dodge Ram 2500 TRX4
  • 2006-2010 Dodge Ram 2500 ST
  • 2006-2007 Dodge Ram 3500 Sport
  • 2006-2007 Dodge Ram 2500 Sport
  • 2006-2010 Dodge Ram 2500 SLT
  • 2007-2007 Dodge Ram 3500 TRX4
  • 2008-2009 Dodge Ram 3500 SXT
  • 2008-2010 Dodge Ram 2500 SXT
  • 2010-2010 Dodge Ram 2500 TRX
  • 2011-2013-Ram-2500 ST
  • 2011-2018-Ram-3500 Laramie
  • 2011-2018-Ram-3500 SLT
  • 2011-2018-Ram-2500 SLT
  • 2011-2018-Ram-3500 Laramie Longhorn
  • 2011-2018-Ram-2500 Laramie Longhorn
  • 2011-2018-Ram-2500 Laramie
  • 2011-2013-Ram-3500 ST
  • 2012-2016-Ram-2500 Outdoorsman
  • 2013-2015-Ram-2500 Lone Star
  • 2013-2018-Ram-2500 Tradesman
  • 2013-2018-Ram-3500 Tradesman
  • 2013-2018-Ram-3500 Big Horn
  • 2013-2015-Ram-3500 Lone Star
  • 2013-2018-Ram-2500 Big Horn
  • 2014-2015-Ram-2500 Laramie Limited
  • 2014-2015-Ram-3500 Laramie Limited
  • 2016-2018-Ram-2500 Limited
  • 2016-2018-Ram-3500 Limited
  • 2017-2017-Ram-3500 Lone Star
View AllClose

0 Reviews

View AllClose