DPS CHUMMINS COMPOUND TURBO KIT FOR CHEVY WITH CUMMINS ENGINE

DPS CHUMMINS COMPOUND TURBOS FOR CHEVY CUMMINS SWAP CONVERSION

Chevy Cummins Conversion Compounds fit all Chevy Truck Years

Even works on Cummins Swap Suburbans 

DPS Chummins compound turbo kit for your Chevy Cummins Swap. Make Chummins conversions run amazing! Our Chummins Compound turbos fit the heater AC box, and actually fit. When doing a 12V Cummins Swap Chevy, Cummins Swap Suburban, or any 5.9 or 6.7 Cummins Swap. It’s the only kit which will truly fit your conversion.

Some modification required to intercooler hose and exhaust may be required.

Chevy Cummins Swap Turbo Selector:

Stage 1     200-550hp  Stock turbo + S475-Unavailable for 1st gen trucks
Stage 2.5  250-625hp  S362/68/0.7 SXE Billet over S475
Stage 3     350-650hp  S362/71/0.7 over S475
Stage 3.5  350-700hp  S362/71/0.7 over S480
Stage 4    350-675hp  S363/68/0.7 over S475
Stage 4.5 350-675hp  S363/68/0.7 over S480
Stage 5    400-700hp  S363/73/0.8 over S475
Stage 5.5 400-800hp  S363/73/0.8 over S480*

Stage 6    400-700hp  S364/71/0.7 over S475*
Stage 6.5 400-750hp  S364/71/0.7 over S480*
Stage 7    450-800hp  S364/71/0.8 over S480*
Stage 8    500-1050hp S366/73/0.8 over S480*
Stage 8.5 500-1100hp S366/73/0.8 over S483*
Stage 9    500-1300hp S369/73/0.8 over S483*

 *For 6.7 cummins engines only use Stage 6 or higher.

Features of Chevy Cummins Compounds:

• Race Comp. Housing for S400 Turbo flows 9% more air
• Designed to fit your Cummins engine in a Chevy conversion
• Designed to clear the heater a/c core
• Wastegated, allowing boost adjustment
• Performance 3-Piece Exhaust Manifold included
• Pre-tapped pyro ports
• Super high flow air filter
• Kevlar/Nomex lined silicone low pressure charge pipe provide superior flow and fitment compared to steel 
• High pressure metal charge pipe.
• Cast hot pipe, not welded thin steel.
• Flexible Steel braided oil supply lines
• Stainless oil drain lines
• S400 Atmospheric Borg Warner turbocharger 
• Diesel Power Source S300 High Pressure Wastegated turbo w/360 Thrust Bearing
• High pressure Ball Bearing Turbo Available for lightening fast spool up.
• Support bracket for Lower (large) turbocharger.
• Lower EGT's by 250-450 degrees, over a single turbocharger.  
• Increase horsepower by 22% to 30% depending on your turbo selection. 
• Excellent for towing
• Computer Flow Model Tested for unmatched air and exhaust flow.
• Tight to the block fitment
• Includes DPS exclusive 3-stage actuator (only available with VGT Turbonator exhaust housing upgrade)

Reasons Why Our Compound Turbos Work So Well:

• A lot more cool air enters the cylinders, because the dual staged compressors work together within their most efficient zones.  The boost air is typically over 100 cooler per pressure made than from a single turbo.
• The air entering the cylinder is at higher pressure, bringing the boost pressure and exhaust drive pressures near a 1:1 ratio.  The intake stroke can actually produce power.
• There are additional air molecules in the cylinder which do not get involved in combustion which carry the heat out of the cylinder (similar to how a jet engine is cooler).
• It has more complete combustion in the cylinders because there’s more air in the cylinder to burn all of the fuel.

Head Studs Recommended For:

• 1988-2002 engines over 48 psi boost, and fire rings for over 55 psi boost
• 2003-2007 engines over 55 psi boost, and fire rings for over 65 psi boost
• 2007.5-2018 6.7 engines, over 48 psi boost, and fire rings for over 55 psi boost 

Our Compound Turbo systems are all capable of over more than 55 psi, but are adjustable depending on truck.

Our Chummins Compound kits have many unique design characteristics like our S400 Race Compressor housing, with a tight elbos.  Cast and machined hot pipe, special molded tubing, giving our kit alone the ability to fit into the complex Conversion Projects, including Cummins swap suburbans,  12v Cummins swap Chevys, and other 5.9 Cummins engines in a Chevy truck.

Where else can you find a Compund kit for your conversion.  No where, but here.  

Horsepower, and torque are increased throughout the entire RPM band, and significantly increased in mid and upper range.  

 **While a downpipe is not included in this kit, we do include a machined exhaust adapter/reducer which v-band clamps onto the exhaust outlet of the S400 turbo, so that a 4” or 5” exhaust pipe can be welded or v-band clamped onto it.  This makes it very convenient to attach whatever exhaust system you have to your cummins swap.   We do offer a 2nd gen Dodge downpipe which will be close but made need adjustments to fit the Conversion projects. 

Please Note: Chevy/Cummins or any other conversion kit are considered a custom application.  The hardest part of these conversion kits are getting both turbos to fit in the truck and clear the heater core. Our compound kits are specifically designed to get both turbos to fit nicely. In most cases the intercooler hose will fit to a factory intercooler, and will allow the intake to fit as well, however because all of these conversion kits are so custom in nature it is the responsibility of the installer to tie in the intercooler, exhaust and intake tubing into the truck.  This is because the engines, alternators, batteries, intercoolers, etc. can be done in some many different configurations it would be impossible for any single kit to universally fit every swap application.  In most of the conversion applications, expect to do some fabricating to exhaust pipe, intake and/or intercooler tubing.

Elevate your Chevy Cummins conversion with the DPS Chummins Compound Turbo Kit, a superior solution designed to enhance performance across all Chevy truck models, including Cummins Swap Suburbans. Tailored for 12V and 6.7 Cummins engines, this kit guarantees an exceptional fit that accommodates the heater and AC box while vastly improving the driving experience.

The DPS Chummins Compound Turbo Kit boasts a remarkable design, featuring a Race Compressor Housing for the S400 Turbo that increases airflow by 9%. Engineered specifically for Chevy conversions, it includes a wastegated setup allowing precise boost adjustment, along with a high-performance 3-piece exhaust manifold and pre-tapped pyro ports. The combination of Kevlar/Nomex-lined silicone and high-pressure metal charge pipes ensures superior airflow and durability, while stainless oil drain lines and flexible steel braided oil supply lines enhance reliability.

With multiple turbo selection stages ranging from 200 to 1300 horsepower, this kit caters to a wide array of performance needs, providing effective solutions whether for towing or maximum power output. The dual-stage compressor system cools intake air significantly and improves combustion efficiency, translating into lower exhaust gas temperatures and heightened power across the RPM band.

Installation is straightforward; however, some modifications to intercooler hoses and exhaust components may be necessary. Each kit is crafted to fit snugly and clear crucial components, making it a smarter choice for your custom conversion project. Embrace powerful, efficient performance with the DPS Chummins Compound Turbo Kit, designed for enthusiasts who demand excellence in their Chevy Cummins Swap conversions. Experience the thrill of enhanced torque and horsepower like never before.