null
BDS SUSPENSION

BDS SUSPENSION BDS2203FPE 5" FOX 2.0 COILOVER RADIUS ARM LIFT KIT 2023 FORD F-250/350 6.7L POWERSTROKE 4WD

(No reviews yet) Write a Review
SKU:
BDS2203FPE
MPN:
BDS2203FPE
Shipping:
Calculated at Checkout
  • BDS SUSPENSION BDS2203FPE 5" FOX 2.0 COILOVER RADIUS ARM LIFT KIT 2023 FORD F-250/350 6.7L POWERSTROKE 4WD
  • BDS SUSPENSION BDS2203FPE 5" FOX 2.0 COILOVER RADIUS ARM LIFT KIT 2023 FORD F-250/350 6.7L POWERSTROKE 4WD
  • BDS SUSPENSION BDS2203FPE 5" FOX 2.0 COILOVER RADIUS ARM LIFT KIT 2023 FORD F-250/350 6.7L POWERSTROKE 4WD
  • BDS SUSPENSION BDS2203FPE 5" FOX 2.0 COILOVER RADIUS ARM LIFT KIT 2023 FORD F-250/350 6.7L POWERSTROKE 4WD
$6,436.93
724-785-4022

Description

Built to outperform, upgrade your 23-24 Ford F250/F350 Super Duty diesel powered truck with this 5-inch radius arm lift kit and FOX 2.5 Performance Elite Coil-over conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your dually truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, heavy duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX Performance shocks.

FOX Performance Elite Coil-Over

FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits

  • FOX 2.5 Coil-Over mounts in factory coil bucket location
  • Adds additional secondary FOX 2.0 shock for max performance
  • Eibach coil springs ride smooth through the roughest terrain
  • Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • FOX shocks are fully serviceable and resistant to corrosion and harsh environments

Recommended Tires & Wheels

(Trimming may be required)

  • 37 x 12.5 with 17 x 9 and 5 in. Backspace
  • 37 x 12.5 with 18 x 9 and 5 in. Backspace
  • 37 x 12.5 with 20 x 9 and 5 in. Backspace

Rear Lift Option

Block Kit

  • Included in the base system.
  • Made of fabricated steel for high strength.
  • Designed to provide correct pinion angles.

Leaf Springs

  • Eliminates any need for a lift block.
  • Reduces axle wrap and creates a more controlled and stable feel.
  • Multi-leaf progressive design for a smooth ride.
  • Maintains factory payload weight ratings.

Shock Option

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

FOX 2.5 Performance Elite Series

  • Increased off-road capabilities
  • Easily adjust your shock for terrain, load and speed
  • 2.5-inch Impact extruded aluminum body
  • Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
  • External reservoir design separates shock oil from the high-pressure nitrogen
  • DSC - Dual Speed Compression Adjuster comes standard
  • Fully serviceable for a lifetime of use
  • 1-year Manufacturer's Warranty

 

IMPORTANT NOTES: 

  1. Vehicles with radius arm mounted ride height sensors will require BDS123303.
  2. Ford recommends the replacement of the pitman arm nut after each time it has been removed.
  3. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
  4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
  5. Due to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
  6. Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section.
  7. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
  8. Installation requires a torque wrench capable of 406 ft-lbs.
  9. Trucks without top mounted overload springs will require (4) UBT4028.
  10. Vehicles with leaf spring ride height sensors must select the rear block option.

Installation Guides :

013414.pdf (cloudinary.com)
FoxShocks.pdf (cloudinary.com)
123613.pdf (cloudinary.com)

Est. Install Time :

8-10 hrs

Difficulty Level :

VeryDifficult

Specialty Tools Needed :

Drill / Bit Set, Pitman Arm Puller, Reciprocating Saw
 
SPECIFICATION: 
  • Front Lift Method : Coil-Over
  • Rear Lift Method : Block
  • Shocks Included : Yes
  • Front Lift Height : 5"
  • Rear Lift Height : 3"

FITMENT: 

YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2023 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2023 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2024 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2024 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL

Elevate your 2023-2024 Ford F-250/F-350 Super Duty with the BDS SUSPENSION BDS2203FPE 5" FOX 2.0 Coilover Radius Arm Lift Kit. Engineered for those who demand more from their diesel-powered trucks, this lift kit is designed to enhance stance, performance, and off-road capability while accommodating up to 37" tires.

The front of the kit features FOX 2.5 Performance Elite coil-over shocks, crafted specifically for diesel applications. These heavy-duty shocks deliver outstanding stability and comfort whether you're cruising the highway or tackling rugged trails. The kit also includes robust replacement radius arms, a forged drop pitman arm, and track bar bracket for optimal steering correction. Sway bar relocation and brake line brackets round out the assembly, ensuring everything is set up for superior handling.

In the rear, a high-strength fabricated lift block paired with longer u-bolts and a matching set of FOX Performance shocks guarantees a smooth, leveled ride. The shocks come with race-tested technology, including external reservoirs for superior thermal management and Dual Speed Compression (DSC) adjustability for personalized setting based on terrain and load.

Constructed with high-strength tubular steel, the radius arms not only integrate seamlessly into your truck's existing setup but also allow for caster adjustments, enhancing driving dynamics. With proper steering geometry maintained through a combination of a heavy-duty track bar bracket and pitman arm, this lift kit represents a significant upgrade for any Super Duty owner.

Additional features include Eibach coil springs and multiple shock options to tailor your ride experience. Installation requires specialized tools and approximately 8-10 hours of effort, making it an ideal project for dedicated enthusiasts. Unlock the full potential of your truck with this robust lift kit designed for serious performance and reliability.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products