null
BDS SUSPENSION

BDS SUSPENSION BDS1947H 6" RADIUS ARM LIFT KIT WITH NX2 SHOCKS 2005-2007 FORD F-250/350 6.0L POWERSTROKE 4WD

(No reviews yet) Write a Review
SKU:
BDS1947H
MPN:
BDS1947H
Shipping:
Calculated at Checkout
$3,095.96
724-785-4022

Description

Easily fit 37 inch tires on your 2005-2007 Ford Super Duty F250 and F350 diesel truck by installing this 6-inch radius arm lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific 6-inch lift Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned NX2 or FOX nitrogen charged shocks.

In the rear the base kit utilizes a high strength lift blocks, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

 

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Features & Benefits

  • Easy, 100% Bolt-on installation
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Recommended Tires & Wheels

(Trimming may be required)

  • 37 x 12.5 with 20 x 9 and 4.5 in. Backspace

Rear Lift Option

4 Inch Block Kit

  • Determine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs. 
  • Blocks made of steel for high strength.
  • Designed to provide correct pinion angles.

6 Inch Leaf Springs

  • Eliminates any need for a lift block.
  • Reduces axle wrap and creates a more controlled and stable feel.
  • Multi-leaf progressive design for a smooth ride.
  • Maintains factory payload weight ratings.

Shock Option

NX2 Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • 1-3/8-inch high-flow piston
  • Self-lubricating seals
  • Silver powder coat finish

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

IMPORTANT NOTES: 

  1. Removal of the factory block is required.
  2. Installation of the rear block kit will result in a "pre-runner" look with the rear of the vehicle 2" lower than the front. To get a level stance you must upgrade to the rear leaf spring option.
  3. These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
  4. If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section.
  5. Although extremely rare, front driveline vibration may occur.
  6. Front exhaust modification may be required to clear the front driveshaft on gas models.
  7. U-bolts will not fit dually models.
  8. Dropped pitman arm will not fit 10 lug wide track F350 models.

Est. Install Time :

8 hrs

Difficulty Level :

Moderate

Specialty Tools Needed :

Grinder/Sanding Disc, Drill / Bit Set, Pitman Arm Puller
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Leaf Spring
  • Shocks Included : Yes
  • Front Lift Height : 6"
  • Rear Lift Height : 6"

FITMENT: 

YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2005 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2005 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2006 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2006 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2007 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2007 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
 
 
 

Elevate your 2005-2007 Ford F-250 or F-350 6.0L Powerstroke with the BDS SUSPENSION BDS1947H 6" Radius Arm Lift Kit, expertly engineered to deliver superior performance and capability. This comprehensive lift kit is designed to seamlessly accommodate 37-inch tires, enhancing your truck’s stance while improving its off-road prowess.

The kit features heavy-duty Pro-Ride coil springs, specifically calibrated for diesel applications, ensuring optimal lift and a smooth ride over any terrain. Complementing these springs are robust tubular radius arms that replace factory components, allowing for caster adjustment and increased ground clearance. Essential steering precision is maintained with the inclusion of a forged drop pitman arm and a track bar relocation bracket.

To further enhance ride quality, the kit is equipped with custom-tuned NX2 nitro shocks that feature vehicle-specific valving for superior control. For those seeking even greater performance, an upgrade to FOX 2.0 Performance Series shocks is available.

The rear installation utilizes high-strength lift blocks, longer U-bolts, and dedicated brake line brackets, ensuring stability and a balanced stance. Choose between a 4-inch block kit or 6-inch leaf springs to customize your setup according to your payload requirements.

Installation is straightforward, with a completely bolt-on design that can be completed in approximately 8 hours using moderate skills. Note that specialty tools such as a grinder and pitman arm puller are needed for optimal results. Perfectly engineered for 4WD diesel models, this lift kit is a game-changer for anyone looking to enhance their truck's capabilities on and off the road.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products