null
BDS SUSPENSION

BDS SUSPENSION BDS1944FS 6" RADIUS ARM LIFT KIT WITH FOX 2.0 SHOCKS 2005-2007 FORD F-250/350 6.0L POWERSTROKE 4WD

(No reviews yet) Write a Review
SKU:
BDS1944FS
MPN:
BDS1944FS
Shipping:
Calculated at Checkout
$2,322.50
724-785-4022

Description

Easily fit 37 inch tires on your 2005-2007 Ford Super Duty F250 and F350 diesel truck by installing this 6-inch radius arm lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific 6-inch lift Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned NX2 or FOX nitrogen charged shocks.

In the rear the base kit utilizes a high strength lift blocks, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

 

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Features & Benefits

  • Easy, 100% Bolt-on installation
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Recommended Tires & Wheels

(Trimming may be required)

  • 37 x 12.5 with 20 x 9 and 4.5 in. Backspace

Rear Lift Option

4 Inch Block Kit

  • Determine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs. 
  • Blocks made of steel for high strength.
  • Designed to provide correct pinion angles.

6 Inch Leaf Springs

  • Eliminates any need for a lift block.
  • Reduces axle wrap and creates a more controlled and stable feel.
  • Multi-leaf progressive design for a smooth ride.
  • Maintains factory payload weight ratings.

Shock Option

NX2 Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • 1-3/8-inch high-flow piston
  • Self-lubricating seals
  • Silver powder coat finish

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

IMPORTANT NOTES: 

  1. Removal of the factory block is required.
  2. Installation of the rear block kit will result in a "pre-runner" look with the rear of the vehicle 2" lower than the front. To get a level stance you must upgrade to the rear leaf spring option.
  3. These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
  4. If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section.
  5. Although extremely rare, front driveline vibration may occur.
  6. Front exhaust modification may be required to clear the front driveshaft on gas models.
  7. U-bolts will not fit dually models.
  8. Dropped pitman arm will not fit 10 lug wide track F350 models.

Est. Install Time :

8 hrs

Difficulty Level :

Moderate

Specialty Tools Needed :

Grinder/Sanding Disc, Drill / Bit Set, Pitman Arm Puller
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Block
  • Shocks Included : Yes
  • Front Lift Height : 6"
  • Rear Lift Height : 5"

FITMENT: 

YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2005 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2005 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2006 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2006 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2007 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2007 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
 

Transform your towing and off-roading experience with the BDS SUSPENSION BDS1944FS 6" Radius Arm Lift Kit, specially designed for the 2005-2007 Ford F-250/350 6.0L Powerstroke 4WD. This comprehensive lift kit elevates your truck's capabilities, allowing it to accommodate impressive 37-inch tires while delivering an outstanding ride quality across all terrains.

The BDS lift kit includes diesel-specific Pro-Ride coil springs, which not only provide a precise 6-inch lift but also ensure a smooth, controlled ride. The heavy-duty radius arms are constructed from high-strength tubular steel, designed to replace factory components for enhanced durability and performance. With built-in caster adjustment, these arms maintain optimal alignment for improved handling.

Installation is a breeze thanks to the 100% bolt-on design, complete with a forged drop pitman arm, sway bar relocation, and brake line brackets necessary for a complete setup. The rear lift utilizes high-strength lift blocks and longer u-bolts, ensuring a level stance when combined with the NX2 Nitro or upgraded FOX 2.0 Performance shocks for superior damping.

Whether you choose the standard NX2 shocks known for their reliability or go for the FOX 2.0 series offering advanced engineering and coatings, you can expect remarkable stability and control. The fabricated blocks provide a reliable foundation that optimizes pinion angles while ensuring the truck maintains its factory payload ratings when paired with BDS’s leaf springs.

The BDS1944FS Lift Kit is not just a performance enhancement; it’s a complete transformation for your F-250 or F-350, redefining limits while enhancing the overall aesthetic appeal of your vehicle. Elevate your ride and unlock your truck's full potential with this expertly engineered lift kit.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products