BDS SUSPENSION BDS1915F 2.5" COILOVER RADIUS ARM LIFT KIT 2020-2022 FORD F-450 6.7L POWERSTROKE 4WD

The BDS Suspension BDS1915F 2.5" Coilover Radius Arm Lift Kit offers improved performance for your 2020-2022 Ford F-450 6.7L Powerstroke 4WD. At the heart of these 2.5" systems are FOX 2.5 factory series remote reservoir coilovers. The coilovers option offers vastly superior damping capability to soak up the harshest terrains offroad while offering comfort for your daily commute. They feature a smooth bore and honed seamless alloy body, 7/8" hardened stainless-steel shaft, black anodized machined 6061-T6 billet aluminum mounts and remote reservoir and come fully assembled with FOX coil springs. These coilovers are preset right out of the box for optimal performance with the weight of the 6.7L Powerstroke diesel engine and pair with FOX 2.0 performance series IFP shocks. The coilers are installed using the supplied bolt-on frame brackets, axle brackets, and reservoir mounts.

In place of the factory stamped steel arms this kit upgrades to heavy duty BDS radius arms. These brawny arms are built from 1-3/4" OD heavy wall tubing, fully welded with gussets for superior strength to the factory units light weight stamped steel units they are replacing. The heavy wall tubular construction improves strength while correcting caster with a lower cam slot. At the frame mount a large OE-style rubber bushing is used to better isolate NHVs and allow for quiet operation without any need for maintenance. These bushings offer superior durability and quieter operation than arms with Heims and flex joints. Also upgraded as part of these new 2.5" lift systems is a high strength replacement track bar designed to recenter the front axle with the lift installed. This new track bar is adjustable, built from 1-3/8" solid steel stock with gusseted ends and a fine thread center turnbuckle with pinch bolts. The track bar comes pre-assembled and ready to bolt into the factory location to adjust to length. At one end these use a greaseable, high-durometer polyurethane bushing and the other end a heavy-duty ball joint. This setup offers strength, comfort and quiet operation over track bars that use Heims. Rounding out the front of these kits are front brake line relocation brackets to allow enough slack in the lines to cycle the suspension offroad while the sway bar relocation brackets to correct sway bar operating angle for optimal performance without sacrificing approach angle.

In the rear, these kits use a 1" bolt-on lift block and new black e-coated U-bolts to level stance while retaining the factory rear springs for ride quality and tow capacity. Finishing out the rear are a pair of matching FOX 2.0 performance series gas shocks to complement the front performance. Take your new Super Duty to the next level with these new 2.5" radius arm systems from BDS Suspension.

FEATURES:

• 2.5" Coilover Lift Kit

• Rear Lift Blocks

• Bump Stop Extensions

• Black E-Coated U-Bolts

• Forged Drop Pitman Arm

• Sway Bar Relocation Brackets

• Brake Line Relocation Brackets

• High-Strength Tubular Radius Arms

• Heavy-Duty Track Bar Relocation Bracket

• All Necessary Mounting Hardware Included

• Covered By The BDS "No Fine Print" Warranty

• FOX 2.0 IFP Performance Series Shocks (Rear)

• FOX 2.0 IFP Performance Series Shocks (Auxiliary)

• FOX 2.5 Factory Series Remote Reservoir Coilovers (Front)

SUGGESTED WHEEL & TIRE COMBINATIONS

35x12.50 w/See Notes and back spacing

*trimming may be required

IN THE BOX

BDS1915F

FOX 2.0 Series

KIT NOTES:

Designed for use on diesel models but can be installed on gas model trucks (will achieve an additional 1/2" front ride height).

Larger tires on stock wheels are not recommended due to brake line clearance required. Use recommended specifications listed in tire and wheel fitment section.

Installation requires a torque wrench capable of 405 ft-lbs.

Wheel/Tire Specs:

Max Tire Size: 35x12.50

Front Wheel: 20x8.25, 8.76" BS

Rear Outer: 20x8.25, -3.33" BS

Rear Inner: 20x8.25, 9.11" BS

KIT CONTENTS:

(1) BDS013207 - 2020-2022 Ford F-450 4wd 2" Rear Block Kit

(1) BDS013263 - 2020-2022 Ford F-450 Super Duty 4wd 2.5" Front Box Kit

(1) BDS123251 - 2005-2022 Ford F250/F350 Radius Arm Kit, Pair

(1) BDS123613 - 2017-2022 Super Duty Coil-over Mount Kit

(1) FOX88402148 - X - Kit: BDS 11-20 Ford F250/F350 Front Coilover, 2.5 Series, R/R 2.5" Lift

(2) FOX98224710 - Fox 2.0 Shock 23.27 x 14.65 x 2- S50/EB1

(2) FOX98224717 - Fox 2.0 Shock 30.05 x 18.45 x 2- EB1/EB1

VEHICLE FITMENT