null
BDS SUSPENSION

BDS SUSPENSION BDS1792FS 4" RADIUS ARM LIFT KIT W/ FOX 2.0 SERIES SHOCK 2013-2018 RAM 3500 6.7L DIESEL 4WD

(No reviews yet) Write a Review
SKU:
BDS1792FS
MPN:
BDS1792FS
Shipping:
Calculated at Checkout
$3,313.62
724-785-4022

Description

Upgrade the ride and style of your 2013-2018 RAM 3500 diesel powered truck equipped with factory rear air ride by installing this 4-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy duty radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, heavy duty air bag spacer, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits

  • Heavy duty tubular radius arms improve strength, handling and caster control
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance

Recommended Tires & Wheels

(Trimming may be required)

  • 37 x 12.5 with 20 x 9 and 5.625 in. Backspace
  • 35 x 12.5 with 20 x 9 and 4.5 in. Backspace
 IMPORTANT NOTES: 
  1. The carrier bearing drop is necessary for models equipped with two piece rear drive shaft.
  2. Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement.

Est. Install Time :

6-8 hrs

Difficulty Level :

Moderate

Specialty Tools Needed :

Drill / Bit Set, Pitman Arm Puller, Welding Equipment
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Blocks
  • Shocks Included : Yes
  • Front Lift Height : 4"
  • Rear Lift Height : 3"
YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2013 Ram 3500 ALL 4WD DIESEL ALL ALL
2014 Ram 3500 ALL 4WD DIESEL ALL ALL
2015 Ram 3500 ALL 4WD DIESEL ALL ALL
2016 Ram 3500 ALL 4WD DIESEL ALL ALL
2017 Ram 3500 ALL 4WD DIESEL ALL ALL
2018 Ram 3500 ALL 4WD DIESEL ALL ALL
 

Transform the performance and appearance of your 2013-2018 RAM 3500 diesel truck with the BDS SUSPENSION BDS1792FS 4" Radius Arm Lift Kit. Engineered for vehicles equipped with factory rear air ride, this comprehensive kit provides a substantial 4-inch lift that enhances both stance and capability, allowing for clearance of larger 35" tires.

At the forefront of the kit's design are diesel-specific Pro-Ride coil springs, crafted to deliver enhanced ride quality across diverse terrains. Accompanying these springs are robust tubular radius arms that replace factory components, providing improved strength and handling while allowing caster adjustments for optimal lift height. Along with a forged drop pitman arm and a heavy-duty track bar bracket, steering geometry is perfectly corrected, ensuring precise control during navigation.

In the rear, the lift kit employs a high-strength fabricated lift block paired with a heavy-duty airbag spacer, longer u-bolts, and a complete set of either NX2 Nitro or FOX 2.0 Performance shocks. This combination not only elevates your truck but also maintains exceptional ride performance, whether on rugged trails or smooth highways.

Designed for easy installation within an estimated 6-8 hours, this lift kit presents a moderate difficulty level and requires specific tools such as a drill, pitman arm puller, and welding equipment. The BDS Suspension BDS1792FS kit is tailored for 4WD diesel models, making it a perfect choice for those seeking both off-road prowess and refined driving experience.

Elevate your truck’s capabilities and aesthetic appeal with the BDS 4" Radius Arm Lift Kit, a well-rounded upgrade that ensures adventure-ready performance without compromising on comfort.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products