null
BDS SUSPENSION

BDS SUSPENSION BDS1596FPE 4" COILOVER RADIUS ARM PERF ELITE LIFT KIT 2011-2016 FORD F-250/350 6.7L POWERSTROKE 4WD

(No reviews yet) Write a Review
SKU:
BDS1596FPE
MPN:
BDS1596FPE
Shipping:
Calculated at Checkout
$6,191.93
724-785-4022

Description

Built to outperform, upgrade your 2011-2016 Ford F250 and F350 Super Duty diesel powered truck with this 4-inch radius arm lift kit and FOX 2.5 Performance Elite Coil-over conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, heavy duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.

In the rear this kit utilizes a high-strength fabricated lift block, u-bolt flip kit for max ground clearance, brake line brackets and a matching set of FOX Performance shocks.

FOX Performance Elite Coil-Over

FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits

  • FOX 2.5 Coil-Over mounts in factory coil bucket location
  • Adds additional secondary FOX 2.0 shock for max performance
  • Eibach coil springs ride smooth through the roughest terrain
  • Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • FOX shocks are fully serviceable and resistant to corrosion and harsh environments

Recommended Tires & Wheels

(Trimming may be required)

  • 35 x 12.5 with 18 x 9 and 4.5 in. Backspace
  • 35 x 12.5 with 20 x 9 and 4.5 in. Backspace

Rear Lift Option

4 Inch Block Kit

  • Included in the base system.
  • Made of cast iron for high strength.
  • Designed to provide correct pinion angles.

Leaf Springs

  • Eliminates any need for a lift block.
  • Reduces axle wrap and creates a more controlled and stable feel.
  • Multi-leaf progressive design for a smooth ride.
  • Maintains factory payload weight ratings.

IMPORTANT NOTES: 

  1. Removal of factory block required. Rear add a leaf is required for models equipped with factory 3-7/8" block for the level to tail high stance. Single add-a-leaf kit # 113218 recommended for more level stance - Dual add-a-leaf kit # 113209 recommended for tail high stance. (Add-A-Leafs do not apply to rear leaf spring-equipped systems)
  2. If equipped with a 2-piece driveshaft, a driveshaft alignment kit (#123402) may be required.
  3. Although extremely rare, front and/or rear driveline vibration may occur.
  4. If equipped with a rear sway bar, #123009 is required.
  5. U-bolts will not work on dually.

Est. Install Time :

8 hrs

Difficulty Level :

Moderate

Specialty Tools Needed :

Drill / Bit Set, Pitman Arm Puller
 
SPECIFICATION: 
  • Front Lift Method : Coil-Over
  • Rear Lift Method : Leaf Spring
  • Shocks Included : Yes
  • Front Lift Height : 4"
  • Rear Lift Height : 3"
YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2011 Ford F-250 Super Duty ALL 4WD ALL ALL ALL
2011 Ford F-350 Super Duty ALL 4WD ALL ALL ALL
2012 Ford F-250 Super Duty ALL 4WD ALL ALL ALL
2012 Ford F-350 Super Duty ALL 4WD ALL ALL ALL
2013 Ford F-250 Super Duty ALL 4WD ALL ALL ALL
2013 Ford F-350 Super Duty ALL 4WD ALL ALL ALL
2014 Ford F-250 Super Duty ALL 4WD ALL ALL ALL
2014 Ford F-350 Super Duty ALL 4WD ALL ALL ALL
2015 Ford F-250 Super Duty ALL 4WD ALL ALL ALL
2015 Ford F-350 Super Duty ALL 4WD ALL ALL ALL
2016 Ford F-250 Super Duty ALL 4WD ALL ALL ALL
2016 Ford F-350 Super Duty ALL 4WD ALL ALL ALL

Unlock the full potential of your 2011-2016 Ford F-250 or F-350 Powerstroke with the BDS SUSPENSION BDS1596FPE 4" Coilover Radius Arm Performance Elite Lift Kit. This meticulously engineered lift kit is designed to elevate your truck’s stance, performance, and off-road capabilities, allowing for a rugged aesthetic and improved functionality. With the ability to accommodate up to 35" tires, this kit is a must-have for any serious truck enthusiast.

Within the kit, you’ll find diesel-specific FOX 2.5 coil-over shocks that deliver exceptional performance, handling, and comfort on both highways and trails. The durable, high-strength radius arms replace the factory components to provide caster adjustment, while the included forged drop pitman arm and track bar bracket ensure optimal steering correction, enhancing the overall driving experience.

The rear suspension features a robust fabricated lift block and a U-bolt flip kit that maximize ground clearance while maintaining your truck's ideal stance. With the addition of FOX Performance shocks in the rear, you can count on superior control and comfort regardless of the terrain.

Installation is streamlined with comprehensive instructions, and the kit is designed for a moderate level of difficulty, typically taking around eight hours to complete. Specialty tools like a drill and pitman arm puller are recommended for the process, ensuring you can tackle the upgrade with confidence.

Constructed from high-quality materials, this lift kit maintains factory weight ratings while effectively eliminating axle wrap for a controlled driving experience. Elevate your Ford Super Duty’s off-road adventures and style with the BDS SUSPENSION BDS1596FPE lift kit, engineered for both durability and performance.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products