null
BDS SUSPENSION

BDS SUSPENSION BDS1565FS 4" 4-LINK LIFT KIT WITH FOX 2.0 SERIES SHOCKS 2020-2022 FORD F-250 6.7L POWERSTROKE 4WD DRW

(No reviews yet) Write a Review
SKU:
BDS1565FS
MPN:
BDS1565FS
Shipping:
Calculated at Checkout
$3,719.39
724-785-4022

Description

Raise the height of your dual rear wheel Ford F350 Super Duty diesel powered truck with this 4-inch lift kit and 4-Link conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, 4-link control arms with conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits

  • Easy, 100% Bolt-on installation
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Recommended Tires & Wheels

(Trimming may be required)

  • 37 x 12.5 with 17 x 9 and 5 in. Backspace
  • 37 x 12.5 with 18 x 9 and 5 in. Backspace
  • 37 x 12.5 with 20 x 9 and 5 in. Backspace

Shock Option

NX2 Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • 1-3/8-inch high-flow piston
  • Self-lubricating seals
  • Silver powder coat finish

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

FOX 2.5 Performance Elite Series

  • Increased off-road capabilities
  • Easily adjust your shock for terrain, load and speed
  • 2.5-inch Impact extruded aluminum body
  • Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
  • External reservoir design separates shock oil from the high-pressure nitrogen
  • DSC - Dual Speed Compression Adjuster comes standard
  • Fully serviceable for a lifetime of use
  • 1-year Manufacturer's Warranty

IMPORTANT NOTES: 

  1. Removal of the factory leaf spring block is required. The net rear lift will vary depending on the height of the factory block but will result in a level stance.
  2. If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)
  3. Torque wrench capable of 405 ft-lbs required.
  4. 37 x 12.50 tires may require minor trimming.

Est. Install Time :

8-10 hrs

Difficulty Level :

Difficult

Specialty Tools Needed :

30mm Socket, Torque Wrench, Pitman Arm Puller
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Block
  • Shocks Included : Yes
  • Front Lift Height : 4"
  • Rear Lift Height : 3"
YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2020 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
 
 

Elevate your 2020-2022 Ford F-250 6.7L Powerstroke 4WD DRW with the BDS1565FS 4" 4-Link Lift Kit, designed specifically for diesel models. This comprehensive lift kit from BDS Suspension enhances your truck's performance, stance, and off-road capability, allowing for the installation of larger 37" tires for an impressive appearance and improved off-road prowess.

The kit features advanced components, including diesel-specific Pro-Ride coil springs that provide optimal lift height and exceptional ride quality over all terrains. The upgrade to a 4-link system optimizes suspension geometry, offering enhanced handling characteristics while increasing strength and stability during heavy use. Made of high-strength 1/4-inch steel, the control arms are constructed to withstand the rigors of off-roading while minimizing caster changes throughout wheel travel.

Steering correction is expertly handled with a forged drop pitman arm paired with a heavy-duty track bar relocation bracket, ensuring precise handling and a centered axle during suspension motion. The fabrication of rear lift blocks along with longer u-bolts promotes a synchronized front-to-rear stance, ensuring that your vehicle has the look and feel of a true off-road powerhouse.

Choose between the standard NX2 Nitro shocks or upgrade to the FOX 2.0 Performance Series shocks for superior performance and durability on any terrain. With easy, 100% bolt-on installation, this lift kit is designed for serious off-road enthusiasts looking for peak performance and style.

Strengthen your Super Duty’s capabilities and embrace the trail with confidence using the BDS1565FS 4" 4-Link Lift Kit—your key to unlocking the full potential of your Ford F-250.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products