BDS SUSPENSION BDS1563H 4" RADIUS ARM LIFT KIT WITH NX2 SHOCKS 2020-2022 FORD F-350 6.7L POWERSTROKE 4WD DRW

Built to take full advantage of the factory suspension design, the BDS Suspension BDS1563H 4" Radius Arm Lift Kit With NX2 Shocks offers enough room for 37" tires on your 2020-2022 Ford F-350 6.7L Powerstroke 4WD DRW. At the heart of this system is a pair of heavy-duty radius arms built to withstand whatever abuse you can throw at them. Built from 1-3/4" OD -10GA DOM tubing with support gussets, these replacement arms are far superior to the factory stamped steel units. They use a high clearance design for extra ground clearance and are formed inward to allow for additional clearance of oversized tires. They incorporate factory style 3-1/4" rubber bushings to minimize road vibrations and allow for a long, maintenance-free bushing life. The arms bolt into the factory mounting points and reposition the front axle to correct caster angle.

The additional 4" lift comes from a pair of full-length diesel specific Pro-Ride coil springs. These paired with BDS NX2 series gas shocks a smooth ride and improved control over rough terrain. To improve steering angles a forged drop pitman arm is supplied with an integrated drag link flip. Used in combination with the 1/4" thick heavy duty track bar drop bracket will position the front axle and keep the track bar angle in phase with the steering for improved handling. Also included for the front suspension are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets, and a NX2 series steering stabilizer with mounting bracket. In the rear, lift blocks with an integrated bump stop wing are used in place of the factory block to level the stance. Longer black e-coated U-bolts and matching NX2 shocks round out this 4" radius arm lift system.

FEATURES:

• 4" Lift Kit

• Rear Lift Blocks

• Bump Stop Extensions

• Black E-Coated U-Bolts

• Sway Bar Drop Brackets

• Forged Drop Pitman Arm

• BDS NX2 Nitro Series Shocks

• Brake Line Relocation Brackets

• High-Strength Tubular Radius Arms

• Heavy-Duty Track Bar Relocation Kit

• Covered By BDS's "No Fine Print" Warranty

• All Necessary Mounting Hardware Included

• Full-Length Pro-Ride Diesel Specific Coil Spring

SUGGESTED WHEEL & TIRE COMBINATIONS

37x12.50 w/17x9 and 4.5"-5" back spacing

37x12.50 w/18x9 and 4.5"-5" back spacing

37x12.50 w/20x9 and 4.5"-5" back spacing

*trimming may be required

IN THE BOX

BDS1563H

NX2 Series

KIT NOTES:

Removal of the factory leaf spring block is required. The net rear lift will vary depending on the height of the factory block but will result in a level stance.

If equipped with a 2-piece rear driveshaft, BDS Carrier Bearing Drop Kit may be required (part # 123402).

A torque wrench capable of 405 ft-lbs is required.

37 x 12.50" tires may require minor trimming.

KIT CONTENTS:

(1) BDS013317 - 2020-2022 Ford F-250/F-350 3In Rear Box Kit

(1) BDS013414 - 2017-2022 Super Duty 4" Front Box Kit

(1) BDS033411 - 2005-2022 Ford F250/F350 Diesel 4in Coil Kit

(1) BDS123251 - 2005-2022 Ford F250/F350 Radius Arm Kit, Pair

(1) BDS85431 - 2017-2022 F250/F350 Single Stabilizer - BDS Only

(2) BDS85700 - Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2

(2) BDS85718 - Shock - 33.00 x 19.25 x 2-3/8 - EB1/EB1

VEHICLE FITMENT