null
BDS SUSPENSION

BDS SUSPENSION BDS1563FPE 4" COILOVER RADIUS ARM PERF ELITE LIFT KIT 2020-2022 FORD F-350 6.7L POWERSTROKE 4WD DRW

(No reviews yet) Write a Review
SKU:
BDS1563FPE
MPN:
BDS1563FPE
Shipping:
Calculated at Checkout
$4,510.50
724-785-4022

Description

Built to outperform, upgrade your Ford F350 Dually Super Duty diesel powered truck with this 4-inch radius arm lift kit and FOX 2.5 Performance Elite Coil-over conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your dually truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, heavy duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX Performance shocks.

FOX Performance Elite Coil-Over

FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits

  • FOX 2.5 Coil-Over mounts in factory coil bucket location
  • Adds additional secondary FOX 2.0 shock for max performance
  • Eibach coil springs ride smooth through the roughest terrain
  • Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • FOX shocks are fully serviceable and resistant to corrosion and harsh environments

Recommended Tires & Wheels

(Trimming may be required)

  • 37 x 12.5 with and in. Backspace

Auxiliary Front and Rear Shock Option

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

FOX 2.5 Performance Elite Series

  • Increased off-road capabilities
  • Easily adjust your shock for terrain, load and speed
  • 2.5-inch Impact extruded aluminum body
  • Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
  • External reservoir design separates shock oil from the high-pressure nitrogen
  • DSC - Dual Speed Compression Adjuster comes standard
  • Fully serviceable for a lifetime of use
  • 1-year Manufacturer's Warranty

IMPORTANT NOTES: 

  1. Removal of the factory leaf spring block is required. The net rear lift will vary depending on the height of the factory block but will result in a level stance.
  2. If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)
  3. Torque wrench capable of 405 ft-lbs required.
  4. 37 x 12.50 tires may require minor trimming.

Est. Install Time :

8-10 hrs

Difficulty Level :

Difficult

Specialty Tools Needed :

Drill / Bit Set, Pitman Arm Puller, Reciprocating Saw
 
SPECIFICATION: 
  • Front Lift Method : Coil-Over
  • Rear Lift Method : Block
  • Shocks Included : Yes
  • Front Lift Height : 4"
  • Rear Lift Height : 2"
YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2020 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
 
 

Transform the performance and stance of your 2020-2022 Ford F-350 6.7L Powerstroke with the BDS1563FPE 4" Coilover Radius Arm Performance Elite Lift Kit. Renowned for its exceptional quality and engineering, this lift kit is tailored to elevate your dually truck's capabilities while providing the perfect fit for up to 37" tires.

At the forefront of this kit are diesel-specific FOX 2.5 Performance Elite coil-over shocks, designed to deliver unparalleled performance both on and off-road. With a robust 2.5-inch diameter and a remote reservoir for optimal cooling, these shocks ensure a smooth ride even in the most challenging conditions. Additionally, the DSC adjuster allows for fine-tuning based on terrain and load, providing remarkable versatility.

The heavy-duty tubular radius arms replace the factory components and feature caster adjustment, enhancing ground clearance and driving stability. Key upgrades include a forged drop pitman arm and track bar bracket, critical for maintaining alignment and improving steering geometry, thereby guaranteeing precise handling.

In the rear, high-strength fabricated lift blocks and longer U-bolts ensure a level stance, complemented by matching FOX Performance shocks to maximize handling and comfort. The kit includes sway bar relocation brackets and brake line brackets to ensure all components work seamlessly together.

This lift kit is engineered for durability and performance, resistant to corrosion and harsh conditions. Installing the BDS1563FPE is straightforward with the right tools, though some experience in vehicle modification is recommended. Ideal for off-road enthusiasts seeking to enhance their truck's capabilities, this lift kit not only elevates your F-350 but redefines its potential. Take the next step in vehicle enhancement with BDS Suspension's premium lift kit, where performance meets reliability.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products