BDS SUSPENSION BDS1557F 4" COILOVER RADIUS ARM LIFT KIT 2017-2019 FORD F-250/350 6.7L POWERSTROKE 4WD

Upgrade your 2017-2019 Ford F-250/350 6.7L Powerstroke 4WD with a BDS Suspension BDS1557F 4" Coilover Radius Arm Lift Kit. Building on the 4" radius arm lift systems, these 4" coilover systems integrate FOX 2.5 remote reservoir coilovers and FOX 2.0 shocks to take your trucks performance and capability to the next level. Up front a pair of heavy-duty replacement radius arms are supplied to correct caster, improve ground clearance, and offer more strength than the factory stamped steel units.

The radius arms are built from 1-3/4" OD -10GA DOM tubing with support gussets and are formed inward to allow for additional clearance of oversized tires. They incorporate factory style 3-1/4" rubber bushings to minimize road vibrations and allow for a long, maintenance-free bushing life. These work in combination with FOX 2.5 Factory Series Remote Reservoir Coilovers. These coilovers are preset right out of the box for optimal performance with the weight of the 6.7L Powerstroke diesel engine and are installed using the supplied frame and axle mounting brackets. Moving onto the steering, the steering correction comes from a forged drop pitman arm with integrated a drag link flip. Also supplied is a 1/4" thick gusseted track bar drop bracket to recenter the front axle and keep the angles in phase for improved handling. For the front suspension are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets, auxiliary FOX 2.0 performance series IFP shocks and upgraded steering stabilizer with mounting bracket are supplied.

In the rear, BDS GlideRide leaf springs are supplied to level the stance. Longer black e-coated U-bolts and matching FOX 2.0 IFP shocks round out this 4" radius arm lift kit. Take your new Super Duty to the next level with BDS Suspension.

FEATURES:

• 4" Lift Kit

• GlideRide Leaf Springs 

• Bump Stop Extensions

• Black E-Coated U-Bolts

• Forged Drop Pitman Arm

• Sway Bar Relocation Brackets

• Brake Line Relocation Brackets

• High-Strength Tubular Radius Arms

• Choice Of Lift Blocks Or Leaf Springs

• Heavy-Duty Track Bar Relocation Bracket

• All Necessary Mounting Hardware Included

• Covered By The BDS "No Fine Print" Warranty

• FOX 2.0 IFP Performance Series Shocks (Rear)

• FOX 2.0 IFP Performance Series Shocks (Auxiliary)

• FOX 2.5 Factory Series Remote Reservoir Coilovers (Front)

SUGGESTED WHEEL & TIRE COMBINATIONS

37 x 12.50 w/17 x 9 and 4.5" - 5" back spacing

37 x 12.50 w/18 x 9 and 4.5" - 5" back spacing

37 x 12.50 w/20 x 9 and 4.5" - 5" back spacing

*trimming may be required

IN THE BOX

BDS1557F

FOX 2.5 Coilover - 6" Leaf Spring

KIT NOTES:

If equipped with a 2-piece rear driveshaft, BDS Carrier Bearing Drop Kit may be required (part # 123402).

37 x 12.50" tires may require minor trimming.

Some models may be factory equipped with a 2-leaf main rear leaf spring pack and others a 3-leaf main. Be sure to order the correct option when customizing your kit.

If your truck is equipped with a factory rear sway bar, BDS end link kit (part # 123005) is required.

KIT CONTENTS:

(2) BDS003639 - 2017-2022 Super Duty 6" Rear Leaf Spring

(1) BDS013414 - 2017-2022 Super Duty 4" Front Box Kit

(1) BDS013438 - 2017-2022 Ford F250/F350 4" Rear Leaf Spring Box Kit

(1) BDS123251 - 2005-2022 Ford F250/F350 Radius Arm Kit, Pair

(1) BDS123613 - 2017-2022 Super Duty Coil-over Mount Kit

(1) BDS85431 - 2017-2022 F250/F350 Single Stabilizer - BDS Only

(1) FOX88402149 - Kit: BDS 11-20 Ford F250/F350 Front Coilover, 2.5 Series, R/R 4" Lift

(2) FOX98224700 - Fox 2.0 Shock 25.65 x 16.05 x 2- S50/EB1

(2) FOX98224718 - Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

VEHICLE FITMENT