BDS SUSPENSION BDS1527FDSC 6" COILOVER 4-LINK LIFT KIT W/FOX DSC 2017-2019 FORD F-250/350 6.7L POWERSTROKE 4WD

Take your 2017-2019 Ford F-250/350 6.7L Powerstroke 4WD to the next level with a BDS Suspension BDS1527FDSC 6" 4-Link Lift Kit W/Fox DSC Adjuster. These systems are based around the tried and true 4-link conversion offering improved stability, strength and caster control during wheel travel compared to the factory radius arm setup. The 4-link brackets are built from 1/4" steel and key off the factory frame bracket and transmission crossmember for extra strength and utilize heavy wall 2" OD DOM control arms to correctly position the front axle. In place of the factory coil this system upgrades to a pair of specially tuned FOX 2.5 Factory Series Remote Reservoir Coilovers with DSC (Dual Speed Compression) Take your Super Duty to the next level in performance. These coilovers are preset right out of the box for optimal performance with the weight of the 6.7L Powerstroke diesel engine and are installed using the supplied frame and axle mounting brackets. Paired to these FOX coilovers are a set of auxiliary FOX 2.0 IFP performance gas shocks to further enhance dampening for a smooth ride on any terrain. A forged drop pitman arm and heavy-duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets.

In the rear, lift blocks are provided for OE 2-leaf main spring pack equipped trucks. The blocks are built from high strength, fully boxed steel with an integrated bump stop wing. Both the blocks and U-bolts are finished in a durable black e-coat finish. Finishing off the rear of this kit are a pair of matching FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. These new 4" 4-link coilover conversion systems allow for clearance of up to 37" tires. Take your Super Duty to the next level with BDS Suspension.

FEATURES:

• 4" Lift Kit

• Bump Stop Extensions

• Black E-Coated U-Bolts

• Sway Bar Drop Brackets

• Forged Drop Pitman Arm

• High-Strength 4-Link Setup

• Brake Line Relocation Brackets

• Rear Lift Blocks (For Factory 2-Leaf Main)

• Heavy-Duty Track Bar Relocation Bracket

• All Necessary Mounting Hardware Included

• Covered By BDS's "No Fine Print" Warranty

• FOX 2.0 IFP Performance Series Shocks (Rear)

• FOX 2.0 IFP Performance Series Shocks (Auxiliary)

• FOX 2.5 Factory Series Remote Reservoir Coilovers (Front)

SUGGESTED WHEEL & TIRE COMBINATIONS

38x13.50 w/17x9/18x9/20x9 and 4.5-5" back spacing

38x13.50 w/17x10/18x10 and 5" back spacing

38x13.50 w/20x10 and 5" back spacing

*trimming may be required

IN THE BOX

BDS1527FDSC

FOX DSC - 2-Leaf Main - 6" Block

KIT NOTES:

If equipped with a 2-piece rear driveshaft, BDS Carrier Bearing Drop Kit may be required (part # 123402).

38 x 13.50 tires may require minor trimming.

Some models may be factory equipped with a 2-leaf main rear leaf spring pack and others a 3-leaf main. Be sure to order the correct option when customizing your kit.

If your truck is equipped with a factory rear sway bar, BDS end link kit (part # 123005) is required.

The indexing ring has not been designed to work on manual shift transfer case models. Modification of the shift cable mount will be required.

KIT CONTENTS:

(1) BDS013219 - 2017-2019 Ford Super Duty - Add-A-Leaf Kit

(1) BDS013601 - 2017-2022 Super Duty 4-Link Box Kit 1of2

(1) BDS013602 - 17-19 Super Duty 6in 4-Link Box Kit 2of2

(1) BDS013607 - 17-19 Super Duty Rear 6in Block Kit

(1) BDS123605 - 2017-2022 SD T-Case Indexing Kit- DSL

(1) BDS123613 - 2017-2022 Super Duty Coil-over Mount Kit

(1) BDS85431 - 2017-2022 F250/F350 Single Stabilizer - BDS Only

(1) FOX88406127 - X - Kit: BDS 05-20 Ford F250/F350 Front Coilover, 2.5 Series, R/R 6" Lift, DSC

(2) FOX98224718 - Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

(2) FOX98224750 - Fox 2.0 Shock 28.25 x 17.15 x 2- S50/EB1

VEHICLE FITMENT