null
BDS SUSPENSION

BDS SUSPENSION BDS1500FS 8" 4-LINK LIFT KIT 2011-2016 FORD F-250350 6.7L POWERSTROKE 4WD

(No reviews yet) Write a Review
SKU:
BDS1500FS
MPN:
BDS1500FS
Shipping:
Calculated at Checkout
  • BDS SUSPENSION BDS1500FS 8" 4-LINK LIFT KIT 2011-2016 FORD F-250350 6.7L POWERSTROKE 4WD
  • BDS SUSPENSION BDS1500FS 8" 4-LINK LIFT KIT 2011-2016 FORD F-250350 6.7L POWERSTROKE 4WD
  • BDS SUSPENSION BDS1500FS 8" 4-LINK LIFT KIT 2011-2016 FORD F-250350 6.7L POWERSTROKE 4WD
  • BDS SUSPENSION BDS1500FS 8" 4-LINK LIFT KIT 2011-2016 FORD F-250350 6.7L POWERSTROKE 4WD
  • BDS SUSPENSION BDS1500FS 8" 4-LINK LIFT KIT 2011-2016 FORD F-250350 6.7L POWERSTROKE 4WD
$5,529.65
724-785-4022

Description

Go big with the BDS Suspension 8-inch lift kit and 4-link conversion for your 2011-2016 Ford Super Duty F250 and F350 diesel truck. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 38" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty 4-link control arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned nitrogen charged shocks.

In the rear this kit utilizes a replacement GlideRide leaf springs with integrated overload leaf, u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

 

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

BDS Glide-Ride Leaf Springs

Built to outperform, BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design where the main leaf pack is broken into two stages:

  1. First, the primary three leafs are functional with no additional load in the vehicle for excellent everyday ride quality. As moderate loads are applied, the secondary leafs are engaged.
  2. Second, if the truck is fully loaded, the bottom overload is engaged for maximum hauling capacity. This setup allows your truck to maintain ride quality unloaded without sacrificing payload.

Upgrading to BDS Glide-Ride leaf springs will reduce axle wrap and provide flexibility throughout the suspension cycle.

Features & Benefits

  • Easy, 100% Bolt-on installation
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Glideride leaf springs to provide full lift height and increased capacity with a built in overload spring
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Recommended Tires & Wheels

(Trimming may be required)

  • 38 x 15.5 with 17 x 9 and 4.5 in. Backspace
  • 38 x 15.5 with 18 x 9 and 4.5 in. Backspace
  • 38 x 15.5 with 20 x 10 and 4.5 in. Backspace

Shock Option

NX2 Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • 1-3/8-inch high-flow piston
  • Self-lubricating seals
  • Silver powder coat finish

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

IMPORTANT NOTES: 

  1. Front bumper spacer kit may be required to run 38"x15.50" tires
  2. Although extremely rare, front driveline vibration may occur
  3. If equipped with 2-piece rear driveshaft, a driveshaft alignment kit (#123406) will be required
  4. Front driveshaft u-joints may max out at full droop. If so, a new front shaft will be required.
  5. If equipped with a rear sway bar, #123009 is required.
  6. U-bolts will not work on dually.
  7. Front auxiliary shocks can be omitted from kit - the system can be used with C/O installed alone

BDS leaf springs are not intended for use beyond the truck's maximum payload capacity. Trucks equipped with overload springs will only have the capacity of a non-overload equipped truck. If heavy payload use is desired, supplemental rear airbags are recommended.

 

Est. Install Time :

8 hrs

Difficulty Level :

Moderate

Specialty Tools Needed :

Grinder/Sanding Disc, Drill / Bit Set, Pitman Arm Puller
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Leaf Spring
  • Shocks Included : Yes
  • Front Lift Height : 8"
  • Rear Lift Height : 6"

FITMENT: 

YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2011 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2011 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2012 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2012 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2013 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2013 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2014 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2014 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2015 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2015 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2016 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2016 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL

Transform your 2011-2016 Ford Super Duty F-250 or F-350 diesel truck with the BDS Suspension BDS1500FS 8" 4-Link Lift Kit. Engineered for optimal performance, this comprehensive lift kit provides a robust 8-inch front lift and a 6-inch rear lift, allowing for clearance to accommodate up to 38" tires. Elevating your truck's presence and capability, it is perfect for off-road adventures or enhancing daily driving.

The kit features diesel-specific Pro-Ride coil springs designed to deliver a reliable combination of lift height and a smooth ride over diverse terrains. Heavy-duty 4-link control arms enhance handling stability and strength, while precision-engineered components like the forged drop pitman arm and sway bar relocation bracket ensure accurate steering and ride quality.

In the rear, the innovative GlideRide leaf springs provide a progressive spring rate design, meaning they flexibly adapt to various loads for a consistent ride, whether empty or fully loaded. The integrated overload leaf engages under heavier loads, maintaining comfort without compromising payload capacity.

Installation is straightforward, utilizing 100% bolt-on components to streamline the upgrade process. The BDS1500FS is compatible with the factory specifications of these Ford models, assuring reliability and performance. Two shock options are available: the standard NX2 Nitro shocks for excellent control and a FOX 2.0 Performance Series upgrade for those seeking maximum performance on rugged terrains.

Your truck deserves unparalleled strength and superior ride quality, and the BDS SUSPENSION BDS1500FS lift kit delivers. Elevate your driving experience with enhanced capabilities, sleek design, and the confidence that comes from a high-quality suspension system. Whether on the job site or tackling off-road trails, this lift kit gives you the versatility and power to conquer any challenge.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products