BD DIESEL 1064264BM 68RFE TRANSMISSION WITH CONVERTER PACKAGE FOR 07.5-18 DODGE RAM 4X4 WITH 6.7L CUMMINS

Enhance the performance and reliability of your 2007.5-2018 Dodge Ram 6.7L diesel with the BD Diesel 1064264BM 68RFE Transmission/Converter Package designed for 4WD vehicles with a billet input. When you invest in this transmission and torque converter bundle from BD, you're equipping your truck with a meticulously matched set that has been rigorously tested on the dyno to ensure optimum functionality.

Experience top-notch features that set BD apart from the rest:

The transmission boasts a hard anodized valve body, a custom-bonded gasket valve body separator plate, heavy-duty cam design, and a reinforced accumulator plate. With a steel girdle, custom QT100 pressure plates, and increased clutch counts, this transmission is built to handle the demanding power and torque of your diesel engine.

The torque converter is equipped with a triple-disc design, enhanced stall for street and towing applications, and HD springs for engagement shock absorption. Constructed with stamped forged one-piece cover and trapezoid teeth for increased durability, this torque converter ensures long-term performance and efficiency.

The assembly features a compact design to reduce overall weight by 12lbs compared to competitors, while still delivering maximum torque and efficiency. The warranty covers parts for 36 months or 150,000 miles and labor for 12 months or 24,000 miles, providing you with peace of mind and long-term support.

Installation takes approximately 9 hours, and detailed manuals are available to assist you every step of the way. With emissions compliance in all 50 states, this product is designed to meet your needs without the need for additional approvals. Upgrade your vehicle with the BD Diesel 1064264BM 68RFE Transmission/Converter Package for improved performance and reliability.

When you purchase a BD transmission and torque converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.

TRANSMISSION:

• Hard anodized valve body and new solenoid pack installed in every unit
• Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
• Heavy duty cam & roller design low reverse one way clutch
• New 4C billet spring retainer
• Steel girdle added to 2C piston to allow for more clutches and broader apply area
• BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
• Over Drive clutches 33% increase & 2C clutches 33% increase
• Custom Big Stack overdrive shaft
• BD reinforced accumulator plate
• TCC limit valve machined and sleeved to address high wear area with in pump
• BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
• BD ProTech68 pressure control module ramps up line pressure to 250 psi using MAP sensor to input load and adjust pressure required
• Performance Transmission but with the added touch of a Billet Input Shaft to take the "snap" from rapid throttle and high horsepower

TORQUE CONVERTOR:

• Triple Disc
• Enhanced Stall - Street/Towing applications
• HD springs absorb shock of engagement
• Stamp forged 1-piece cover
• Eliminates warpage from clutch heat
• Taller cover can be rebuilt more often
• Trapezoid teeth design
• Engineered tighter tolerances
• Self-centering trapezoid teeth design increases contact decreases wear and chatter
• Thrust bearings - not plastic thrust washers
• Riveted piston ensures alignment & eliminates vibration or embrittlement from welding
• Cast stator designs maximizes torque
• New sprag components ensure long term durability
• Furnaced brazed turbine fins for improved fluid coupling efficiency
• Reduced overall weight by 12lbs compared to competitors

• 9 Hours

Parts

• 36-Months
• 150,000 Miles

Labour

• 12-Months
• 24,000 miles

Note

• No Race abuse covered. Remote filter required for inspection with cooler flow rate in GPM at Oil/Air transmission cooler outlet.

• This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)