BD DIESEL 1050491 VENOM CP4 TO CP3 CONVERSION KIT WITH PUMP FOR 19-20 RAM WITH 6.7L CUMMINS

Travel back in time to a period when your CUMMINS fuel system ran seamlessly and you could trust its reliability. The BD Diesel 1050491 Venom CP4 to CP3 Conversion Kit allows you to revert to the tried-and-true Bosch CP3 high-pressure fuel pump that was a staple in Dodge 5.9L/6.7L Cummins Rams for years. In 2019, Cummins transitioned to the Bosch CP4.2 pump, which, similar to its counterparts in GM and Ford applications, came with its set of challenges.

The CP4 pump's lower volume output demanded increased speed to meet fuel requirements, making it vulnerable to catastrophic failure. In the event of a breakdown, the entire fuel system would need replacement due to metal debris contamination, resulting in repairs exceeding $10,000. Safeguard yourself from such costly incidents, enhance power, and boost durability by outfitting your Cummins with the BD Diesel CP3 conversion kit.

This all-inclusive kit negates the need for tuning and is compatible with or without a stock CP3 pump. For those seeking superior performance, an optional high-performance R900 Stroker pump variant is available. The kit replaces the CP4 pump with the dependable CP3 pump, featuring a design tailored for Duramax-style CP3 pumps and includes a fuel control actuator (FCA) extension harness.

With a reasonable installation period of 3 hours – slightly longer for models equipped with the Cummins CP3 pump – the kit ensures a hassle-free upgrade process. Enjoy peace of mind with a 12-month warranty on parts, and rest assured that this conversion is EPA compliant. However, it's important to note that any further alterations to the fuel system may impact EPA compliance. Please be advised that this product is not for sale in California for licensed vehicles. Transition back to reliability with the BD Diesel 1050491 Venom CP4 to CP3 Conversion Kit.

Go back to a simpler time, when things worked and you could rely on your Cummins fuel system. Since the introduction of the common rail fuel system in 2003, all Dodge 5.9L/6.7L Cummins Rams were equipped with a reliable Bosch CP3 high pressure fuel pump. Then in 2019, Cummins made major changes and switched to a Bosch CP4.2 pump which has seen its share of problems in the GM and Ford Applications. Due to the CP4's lower volume output, Cummins had to increase the drive ratio of the pump and turn it faster to keep up with fuel demand!

The CP4 is also susceptible to catastrophic failure. When disaster strikes, the entire fuel system requires replacement after metal debris from the failed pump spreads throughout. Cleaning the tank, replacing lines and injectors, and, of course a new pump can end up costing you in excess of $10,000 in repairs! Prevent a costly failure, increase power and add durability by backdating your Cummins to a CP3 with a conversion kit from BD Diesel. This kit comes with everything you need for install, and does not require tuning! Kits are available with or without a stock CP3 pump, and, is also available with a high performance R900 stroker pump.

• Replaces CP4 injection pump with reliable CP3 pump
• Designed for use with Duramax Style CP3 pump
• No tuning required
• EPA compliant
• Available with or without CP3 pump
• Also available with an R900 Stroker pump (# 1050651)
• Includes fuel control actuator (FCA) extension harness
• No core charge

• 3 Hours
• Longer install time with Cummins model CP3 pump

Parts

• 12-Months

• Conversion is EPA compliant on its own - any addional alterations to fuel system (tuners/programmers/injectors) may not be EPA compliant
• Not for sale on licensed California vehicles

• This product has met EPA's reasonable basis requirements and is legal for sale and use within the jurisdiction of the federal EPA. (EMS:2)