BANKS 42790-PC MONSTER-RAM 4" INTAKE ELBOW W/FUEL LINE AND HUMP HOSE FOR 07.5-18 CUMMINS 6.7L 24V

4-inch CNC machined inlet. Four 1/8-inch NPT ports designed for optimal atomization of water-methanol or NOS. Accommodates stock mounting points. Optimizes air pressure and distribution into the intake manifold. Includes proprietary #1 fuel line, 4 to 3.5-inch hump hose, and all necessary hardware. Not emissions compliant.

The Monster-Ram improves airflow from the intercooler and flows 1008 cfm (77.01 lbs/min) compared to Stock's measly 432 cfm (33.00 lbs/min). It raises boost without increasing backpressure at the turbine which results in a more responsive and power efficient engine. Up to four 1/8 inch NPT ports are pre drilled to measure pressure, temperature, or flow. The top two NPT ports are positioned to allow for proper atomization directly into the center of the air mass. Accommodates stock mounting points including Temperature and Pressure sensors, wire harness, and dipstick tube.

At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance, and efficiency are the ultimate goals. To make it all happen the engine has to breathe freely and without needless restrictions. Finding ways to pump your engine full of cooler, denser air has always been the key.

Our High-Ram intakes have always whipped the competition. Our new Monster-Ram flat-out destroys it. Monster ram is CNC ported to a full 4.0 inch and was designed utilizing the latest in electronic computational fluid-dynamic technology. Next it was tested on the flow bench and dyno, then finally proven in the real world where the rubber meets the road. The Monster-Ram is a beast that only Banks could have unleashed. A simple, direct-replacement casting, Monster-Ram is instant power, performance, and acceleration gratification.

It's the perfect upgrade whether you're just starting out or working to build a serious, purpose-built race machine.

Key Features

• Four 1/8-inch NPT ports (Top ports targeted for optimal atomization of Straight-Shot water-methanol)
• Includes custom fuel line, 4 to 3.5-inch hump hose, and all necessary hardware
• Optimizes air pressure and distribution going into the intake manifold
• Raises boost without increasing turbine drive pressure
• Improves flow of oxygen-rich air into cylinders
• Larger and less restrictive than stock intake
• Accommodates stock mounting points
• Improves airflow from the intercooler
• 4-inch CNC machined inlet
• Outflows stock over 133 percent
• Quicker throttle response
• Red Powder coat Finish

The BANKS 42790-PC Monster-Ram Intake Elbow is a high-performance upgrade designed specifically for the 2007.5-2018 Cummins 6.7L 24V engines. Featuring a robust construction and advanced engineering, this intake elbow is a game-changer when it comes to optimizing your engine's performance.

Crafted with a 4-inch CNC machined inlet, the Monster-Ram ensures maximum airflow to your engine. It boasts four 1/8-inch NPT ports, strategically positioned for ideal atomization of water-methanol or NOS, providing enhanced power output. The top two NPT ports are designed to deliver atomization directly into the center of the air mass for improved efficiency.

With a focus on airflow optimization, the Monster-Ram eliminates unnecessary restrictions and improves air pressure and distribution into the intake manifold. This results in a significant boost in power without compromising the engine's responsiveness. The Monster-Ram outperforms stock intakes by flowing an impressive 1008 cfm compared to the stock's 432 cfm, making it a superior choice for enthusiasts seeking enhanced performance.

Equipped with custom fuel lines, a hump hose, and all necessary hardware, the Monster-Ram is engineered for easy installation and compatibility with stock mounting points. Its red powdercoat finish adds a stylish touch, while its functionality remains unmatched. Banks Power's commitment to maximizing airflow and delivering exceptional power is evident in this groundbreaking product.

Ideal for both entry-level enthusiasts and professional racers, the Monster-Ram is a must-have for individuals looking to elevate their engine's capabilities. Upgrade your Cummins engine with the BANKS 42790-PC Monster-Ram Intake Elbow and experience the difference in power, performance, and acceleration like never before.