BANKS 42788 MONSTER-RAM 3.5" INTAKE ELBOW KIT W/FUEL LINE FOR 07.5-18 CUMMINS 6.7L 24V

3.5-inch CNC machined inlet. Four 1/8-inch NPT ports designed for optimal atomization of water-methanol or NOS. Accommodates stock mounting points. Optimizes air pressure and distribution into the intake manifold. Includes proprietary #1 fuel line, and all necessary hardware. Not emissions compliant.

The Monster-Ram improves airflow from the intercooler and flows 906 cfm (69.22 lbs/min) compared to Stock's measly 432 cfm (33.00 lbs/min). It raises boost without increasing backpressure at the turbine which results in a more responsive and power efficient engine. Up to four 1/8 inch NPT ports are pre drilled to measure pressure, temperature, or flow. The top two NPT ports are positioned to allow for proper atomization directly into the center of the air mass. Accommodates stock mounting points including Temperature and Pressure sensors, wire harness, and dipstick tube.

At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance, and efficiency are the ultimate goals. To make it all happen the engine has to breathe freely and without needless restrictions. Finding ways to pump your engine full of cooler, denser air has always been the key.

Our High-Ram intakes have always whipped the competition. Our new Monster-Ram flat-out destroys it. Monster ram is CNC ported to a full 3.5 inch and was designed utilizing the latest in electronic computational fluid-dynamic technology. Next it was tested on the flow bench and dyno, then finally proven in the real world where the rubber meets the road. The Monster-Ram is a beast that only Banks could have unleashed. A simple, direct-replacement casting, Monster-Ram is instant power, performance, and acceleration gratification.

It's the perfect upgrade whether you're just starting out or working to build a serious, purpose-built race machine.

Key Features

• Optimizes air pressure and distribution going into the intake manifold
• Raises boost without increasing turbine drive pressure
• Includes Fuel Line and all necessary hardware
• Improves flow of oxygen-rich air into cylinders
• Larger and less restrictive than stock intake
• Accommodates stock mounting points
• Outflows stock over 110-133 percent
• 3.5 inch CNC machined inlet
• Four 1/8 inch NPT ports
• Natural Bare Finish

The BANKS 42788 MONSTER-RAM INTAKE ELBOW KIT with a 3.5-inch CNC machined inlet is a powerhouse component designed specifically for the 2007.5-2018 Cummins 6.7L 24V engine. This kit is engineered to revolutionize your engine's performance by optimizing air pressure and distribution into the intake manifold, resulting in explosive power gains.

Featuring four 1/8-inch NPT ports tailored for supreme atomization of water-methanol or NOS, the Monster-Ram ensures maximum airflow efficiency. It boasts a substantial increase in airflow capacity, outperforming the stock model with an impressive 906 cfm (69.22 lbs./min) while the stock falls short at 432 cfm (33.00 lbs./min). This upgrade raises boost levels without added backpressure at the turbine, offering a more responsive and power-efficient engine.

Crafted to accommodate stock mounting points, this Monster-Ram kit includes a proprietary #1 fuel line and all necessary installation hardware for seamless integration. With a focus on enhancing air intake and combustion, this product is not just an upgrade but a performance transformation.

The Monster-Ram's exceptional design incorporates next-generation computational fluid-dynamic technology, ensuring optimal airflow and horsepower gains. Tested rigorously on flow benches and dynos, this kit has been proven to deliver real-world results that speak volumes. When it comes to maximizing engine airflow and power output, the Monster-Ram stands out as the ultimate solution for enthusiasts and racers alike.

Whether you're a beginner looking to enhance your vehicle's capabilities or a seasoned professional seeking to unleash maximum performance, the BANKS 42788 MONSTER-RAM INTAKE ELBOW KIT is the ideal choice. Embrace the power, efficiency, and acceleration gratification that only Banks Power can deliver with this exceptional product. Note: This kit is for Pure Race Use Only and requires specific ECM programming for optimal performance.