FOX FOX88302046 10-13 FORD RAPTOR FRONT COILOVER INTERNAL BYPASS FACTORY RACE 3.0 REMOTE RESERVOIR 7.6 INCH 0-2 INCH LIFT

At FOX, racing has always been the cornerstone of our product development. Our 3.0 Factory Race Series Coil-over Internal Bypass, position-sensitive shocks maximize the entire wheel Travel, increases oil capacity, and adds 60 percent more damping area over the stock FOX SVT shocks.

They allow for a plush predictable ride over normal off-road driving conditions and also have the ability to ramp up damping force for extreme use.

These heavy-duty, steel-bodied shocks are loaded with anodized billet aluminum Components and race-bred internal Valving.

They are designed to bolt right on to your factory mounts. The integrated coil spring can be adjusted for preload and ride height and come pre-set to level your vehicle right out of the box.

Large 2.5 inch remote Reservoirs with a large -10 hose increasing the shocks cooling capabilities. The Factory Race Series 3.0 Coil-over Internal Bypass shocks utilize all of the same Components from our race winning Trophy Truck shocks with Eibach springs, stainless steel shock Shafts, PTFE-lined spherical Bearings, proprietary racing oil and high-temp Viton Seals.

Part Number
883-02-046
Features

• Performance Tuned For Vehicle Specific Application
• Durable Zinc Plated Seamless Alloy Body
• External Reservoir System Dissipates Heat Fast
• Black Anodized CNC Machined Aluminum Components
• Series Factory Race
• Travel 7.53
• Front Lift Height 0-2
• Body 3.0 inch Smooth bore and honed seamless alloy Body
• Body Plating Zinc-plated for long lasting finish
• Reservoir 2.5 inch Smooth bore and honed seamless alloy Reservoir
• Components Black-anodized, CNC-machined 6061-T6 billet aluminum
• Shaft 7/8 inch 17-4 H900 stainless steel hard-chrome plated
• Piston 6061-T6 hard-anodized, high flow aluminum Piston
• Valving Application specific Valving to maximize performance
• Seals Redundant sealing pack system main seal, wiper seal, scraper seal Optional high temperature Viton Seals
• Bearings PTFE-lined, heat-treated, alloy steel spherical
• Extended Length 27.97
• Compressed Length 20.44
• Top Mount TM
• Bottom Mount Eyelet

The FOX FOX88302046 10-13 Ford Raptor Front Coilover Internal Bypass Factory Race 3.0 Remote Reservoir is engineered to elevate your off-road driving experience to a whole new level. Designed with racing at its core, this coilover system utilizes position-sensitive shocks that maximize wheel travel, increasing oil capacity and enhancing damping area by an impressive 60% compared to stock shocks.

With its heavy-duty steel construction and anodized billet aluminum components, durability and performance are paramount. This setup not only smoothens your ride over typical off-road conditions but also ramps up damping force for extreme situations, ensuring that you remain in control no matter the terrain.

Compatible with factory mounts, installation is simple and hassle-free. The integrated coil spring is adjustable, allowing for optimal preload and ride height right out of the box, catering to a lift range of 0-2 inches. The large 2.5-inch remote reservoirs, combined with a -10 hose, significantly enhance cooling capabilities, enabling you to push the limits without compromising performance.

Reinforced by components derived from trophy-winning race truck shocks, the FOX 88302046 includes Eibach springs, stainless steel shafts, PTFE-lined bearings, proprietary racing oil, and high-temperature Viton seals ensuring longevity and resilience.

The coilover’s specifications are nothing short of impressive: a seamless alloy body with a zinc plating for long-lasting protection, application-specific valving to maximize performance, and an extended length of 27.97 inches, with a compressed length of 20.44 inches.

Transform your Ford Raptor's capabilities with this advanced coilover system, designed for enthusiasts who demand nothing but the best in performance and reliability.