DIESELSITE
DIESEL SITE WW38 WICKED WHEEL 2 1994-2003 FORD 7.3L POWERSTROKE
(No reviews yet)
Write a Review
- SKU:
- DIWW38
- MPN:
- WW38
- Shipping:
- Calculated at Checkout
Description
This wheel is a 1994 - 2003 Ford PSD 7.3L PSD Performance Billet Compressor Wheel for STOCK GTP38 and TP38 Turbo Applications - Wicked Wheel 2 (WW2) Compressor Wheel Series Part #WW38
FOR STOCK TURBO APPLICATIONS FROM 1994-2003
(FREE PEDESTAL O-RINGS INCLUDED)
While capable of high boost numbers with supporting mods (like those shown in the graph below) these wheels are safe for stock turbo applications! We recommend that you continue using a wastegate in 1999-2003 models to avoid excessive boost. For maximum stock turbo life, do not exceed 32 lbs. of boost for extended periods of time. :-)
FOR STOCK TURBO APPLICATIONS FROM 1994-2003
(FREE PEDESTAL O-RINGS INCLUDED)
Special Note: This turbo has a standard right hand thread - meaning you turn the compressor wheel to the left to loosen. No need to torque the Wicked Wheel on. Simply snug the Wicked Wheel until it fully seats. It will self-tighten to full torque. The Wicked Wheel is balanced at the factory. Turbo balancing after installation is not necessary.
While capable of high boost numbers with supporting mods (like those shown in the graph below) these wheels are safe for stock turbo applications! We recommend that you continue using a wastegate in 1999-2003 models to avoid excessive boost. For maximum stock turbo life, do not exceed 32 lbs. of boost for extended periods of time. :-)
Wicked Wheel® is a registered trademark of Bob Riley and DIESELSITE, INC. All rights reserved. Any intent to mislead or confuse customers by using our name or mark is a violation of trademark infringement and will be enforced.
DO NOT USE AN IMPACT WRENCH TO CHANGE TURBO WHEELS! Impact wrenches cause stress fractures in the shaft that will cause failure either very soon or thousands of miles down the road. It's like a crack in your windshield that grows over time. Take your time and remove the turbo, hold onto the turbine shaft and remove the compressor wheel with an open end wrench.
HERE IS A LINK TO THE OLD WICKED WHEEL® INSTRUCTIONS - THESE WILL STILL WORK FOR THE NEW WHEEL. http://www.dieselsite.com/pdffiles/ww.pdf
Related Products
Related Products
DIESEL SITE WW3866 WICKED WHEEL 2 1994-2003 FORD 7.3L POWERSTROKE W/ AFTERMARKET GTP38 & TP38 TURBOCHARGER
DIESELSITE
$259.00
Special Note: This turbo has a standard right hand thread - meaning you turn the compressor wheel to the left to loosen. No need to torque the Wicked Wheel on. Simply snug the Wicked Wheel until it...
DIESEL SITE WW38R WICKED WHEEL 2 1999.5-2003 FORD 7.3L POWERSTROKE W/ GARRETT POWERMAX GTP38R
DIESELSITE
$259.00
Quicken the throttle response of your 1999.5-2003 Ford 7.3L Powerstroke while improving surge protection and performance when you install the Diesel Site Wicked Wheel 2 WW38R! The unique design of...
DIESEL SITE WW60PM WICKED WHEEL 2 2003-2007 FORD 6.0L POWERSTROKE W/ POWERMAX TURBOCHARGER
DIESELSITE
$259.00
Get a better throttle response when you install the Diesel Site Wicked Wheel 2 WW60PM to your 2003-2007 Ford 6.0L Powerstroke offers superior surge protection and performance! The unique design of...