null
BDS SUSPENSION

BDS SUSPENSION BDS2106FS 6" RADIUS ARM LIFT KIT WITH FOX 2.0 SHOCKS 2013-2018 RAM 3500 6.7L DIESEL 4WD

(No reviews yet) Write a Review
SKU:
BDS2106FS
MPN:
BDS2106FS
Shipping:
Calculated at Checkout
$2,936.59
724-785-4022

Description

Take your 2013-2018 RAM 3500 diesel powered truck to the next level with this 6-inch radius arm lift kit from BDS Suspension. Engineered for trucks factory equipped with rear air ride. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy duty radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, heavy duty air bag spacers, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits

  • Heavy duty tubular radius arms improve strength, handling and caster control
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance

Recommended Tires & Wheels

(Trimming may be required)

  • 37 x 13.5 with 17 x 8 and 5.625 in. Backspace
  • 37 x 12.5 with 18 x 9 and 4.5 in. Backspace
  • 35 x 12.5 with 17 x 9 and 4.5 in. Backspace

IMPORTANT NOTES: 

  1.  Kits come standard with 6-Bolt indexing ring kit. If equipped with heavy-duty 8-bolt t-case order 122813 in place of 122623
  2. For rear leaf spring equipped models only.
  3. The carrier bearing drop (122405) is necessary for models equipped with two piece rear drive shaft.
  4. Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
  5. DRW models fit inner wheel clearance to the upper u-bolt plate on 6" kits
  6. Fits OE equipped air ride systems only

Installation Guides :

res.cloudinary.com/fox-factory/image/upload/v1707460312/BDS/012615.pdf
012318_012618.pdf (cloudinary.com)
122623.pdf (cloudinary.com)

Est. Install Time :

6-8 hrs

Difficulty Level :

Moderate

Specialty Tools Needed :

Step Drill Bit, Drill / Bit Set, Pitman Arm Puller, Welding Equipment
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Blocks
  • Shocks Included : Yes
  • Front Lift Height : 6"
  • Rear Lift Height : 5"

FITMENT: 

YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2013 Ram 3500 ALL 4WD DIESEL ALL ALL
2014 Ram 3500 ALL 4WD DIESEL ALL ALL
2015 Ram 3500 ALL 4WD DIESEL ALL ALL
2016 Ram 3500 ALL 4WD DIESEL ALL ALL
2017 Ram 3500 ALL 4WD DIESEL ALL ALL
2018 Ram 3500 ALL 4WD DIESEL ALL ALL
 

Elevate your 2013-2018 RAM 3500 Diesel 4WD to new heights with the BDS Suspension BDS2106FS 6" Radius Arm Lift Kit featuring FOX 2.0 Shocks. Crafted specifically for trucks equipped with rear air ride systems, this comprehensive lift kit is engineered to enhance stance, performance, and off-road capability, allowing clearance for tires up to an impressive 37 inches.

The kit is built for resilience and optimized ride quality, incorporating diesel-specific Pro-Ride coil springs that ensure a smooth journey across diverse terrains. The heavy-duty radius arms replace the factory components, delivering superior strength and enhanced handling capabilities with adjustable caster settings. Steering is refined with a forged drop pitman arm, reducing steering angles and maintaining alignment through suspension travel.

In the rear, a high-strength fabricated lift block complements heavy-duty airbag spacers and longer u-bolts, all paired with matching NX2 Nitro or FOX 2.0 Performance shocks designed for premium off-road performance. Every detail, from the front sway bar correction to the heavy-duty transmission crossmember, ensures a seamless installation while correcting driveline angles and allowing the use of factory driveshafts.

The BDS2106FS Lift Kit doesn't just transform aesthetics; it dramatically improves overall truck capability and driving experience. Recommended tire sizes include 37x13.5 with a 17x8 wheel or 35x12.5 with a 17x9 wheel, offering various customization options. Installation is straightforward, estimated between 6-8 hours, with a moderate difficulty level, requiring common tools such as a pitman arm puller and welding equipment.

Transform your RAM 3500 into a powerhouse built for adventure and make a statement on the road and off with the BDS Suspension BDS2106FS Lift Kit.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products